Publikasjoner og ansvarsområder
Aging of Insulating Linings in Aluminium Electrolysis Cells
Dimensional stability of materials used in aluminium electrolysis cells are important for stable cell operation. The observed compression of insulating linings from autopsies of industrial cells are in many cases much higher than would be expected from laboratory creep tests of the corresponding mat...
Gas Anodes Made of Porous Graphite for Aluminium Electrowinning
One of the major downsides of the current aluminium production process is the high CO2 emission. One alternative is to replace the consumable carbon anodes with inert anodes so that oxygen evolves instead of CO2. Also PFC emissions will be eliminated by using inert anodes. However, so far a sufficie...
V2O5-based Cathode Materials for Rechargeable Mg-Ion Batteries
Creep - Ageing of insulating linings in aluminium electrolysis cells
V2O5-Based Cathode Materials for Rechargeable Mg-Ion Batteries
ELECTROWINNING OF ALUMINIUM USING DEPOLARIZED GAS ANODES
A concept for electrowinning of aluminium using depolarized gas anodes
Development of thin film supported tubular membranes for high temperature gas separation
SnO2-Based Gas (Methane) Anodes for Electrowinning of Aluminum
SnO2-based and carbon-based gas anodes were studied in molten Na3AlF6-AlF3-Al2O3 at 1123 K (850 °C) for aluminum electrolysis. Methane was introduced to the porous anodes to take part in a three-phase (anode/electrolyte/methane) boundary reaction. Carbon was used as the cathode. It was observed that...