Søk i SINTEF

Modern vessels are designed to collect, store and communicate large quantities of ship performance and navigation information through complex onboard data handling processes. That data should be transferred to shore based data centers for further analysis and storage. However, the associated transfer cost...

...environments. Clothing and textiles produced from synthetic fibres such as polyester (PES), polyacrylic (PAC) and nylon (PA) are considered some of the main sources of MPFs. However, there has been little focus on the environmental fate and effects of MPFs compared to microplastic particles and fragments. Our...

...for supply and demand of nickel in batteries and non-battery applications up to 2050. Using a demand-driven supply-constrained dynamic material flow model, we analyse how the growing demand for nickel to batteries can be met in the future, the potential bottlenecks in the supply chain, and the consequences...

...applications. The mixture successfully and efficiently blocked the cement sample as the polymer-CO₂ mixture flowed through the sample cracks. A posterior sample analysis did confirm the presence of polymer blocking the crack volume. Thus, a promising sealing agent for P&A and remediation has been identified...

...aluminium alloys for scanning and transmission electron microscopy, as it yields a good surface quality and large flat, electron-transparent areas. Like many chemical surface treatment procedures, the electropolishing process can create a Cu-rich layer between the aluminium matrix and the outermost aluminium...

The need to become more efficient in agriculture and the food industry exists parallel to the challenge of climate change. Meat and dairy production is the target of much scrutiny due to methane (CH₄) emissions and global warming. On the other hand, it should be noted that two-thirds of the world’s...

In this chapter, we discuss how two-way coupled fluid flow and geomechanics can be modeled in the MATLAB Reservoir Simulation Toolbox (MRST) using the ad-mechanics module. A brief introduction to linear poroelasticity is provided, which is a common framework for studying geomechanics in the context of...

...oxides, Nd2O3, and Pr2O3 or their mixtures in different fluoride electrolytes composed of NdF3, PrF3, and LiF at ca. 1040 °C were monitored using a graphite probe inserted into the electrolyte during the dissolution process. Fast voltage sweeps of 100 V/s were applied to the graphite probe, and the current...