Søk i SINTEF

The present work explores the concept of high-entropy alloys to design FeCoNi-based oxides suitable for functional applications. Fundamental changes in electronic behaviour produced by metal substitution and variable oxygen content were screened to investigate the potential of these materials for...

... Sublimation-grown 3C-SiC crystals were implanted with B ions at elevated temperature (400 °C) using multiple energies (100 to 575 keV) with a total dose of 1.3×1017 atoms/cm2 in order to form intermediate band (IB) in 3C-SiC. The samples were then annealed at 1400 °C for 60 min. An anomalous area...

Many small- or medium-sized communities in Northern Europe employ only primary wastewater treatment plants (WWTPs) and effluent discharges can be a relevant source of pollution. The current study combines monitoring and modelling approaches to investigate concentrations, influent patterns, size...

Films were reactively sputtered from a high entropy alloy (HEA) FeCoNiCuGe target in an Ar/O₂ plasma. The case of zero O₂ gas flow yielded HEA films of FeCoNiCuGe. These as-deposited HEA films have a face centered cubic (FCC) structure, showing a texture with columnar grains containing many planar...

Probe-corrected transmission electron microscopy and associated techniques is a powerful tool in the characterization of functional materials. Boron (B) has the potential for generating an intermediate band in cubic silicon carbide (3C-SiC), turning this material into a highly efficient absorber...

Hybrid graphene-based nanostructures are considered promising materials for energy storage applications. However, the synthesis of high-quality hybrid graphene nanostructures at high yields is challenging. In the present work we propose a novel, single-step microwave plasma-enabled approach to...

Embracing the design for disassembly (DfD) mindset when constructing new and renovating existing buildings is a promising means of achieving our climate targets and putting the circular economy principles in practice, as promoted in the European Green Deal. Current greenhouse gas emissions...

The production, diversity and use of engineered nanomaterials (ENMs) increases globally as the market and number of applications for ENM expands. Silver (Ag), zinc (Zn) and titanium dioxide (TiO₂) ENMs are among the most widely used in industrial processes and consumer products leading to increased...

Due to their widespread application in consumer products, elemental titanium (e.g., titanium dioxide, TiO₂) and silver (Ag), also in nanoparticulate form, are increasingly released from households and industrial facilities to urban wastewater treatment plants (WWTPs). A seven-day sampling campaign...

We report the first nanoscale investigation of FeCoNi(AlMn)x high-entropy alloys (HEAs) processed by laser metal deposition. The structural evolution of the alloy upon chemical composition variation (0.2 ≤ x ≤ 1.5) was investigated by combining imaging and spectroscopies in (scanning) transmission...

Cold regions including the Arctic are warming fast, resulting in increased losses of snow and ice cover. A climate intervention approach, where hollow glass microspheres (HGMs) are applied on snow and ice surfaces such as Artic sea ice has been suggested for ice preservation. HGMs are commercial...

High entropy alloy (HEA) films of CrFeCoNiCu were deposited by sputtering. Their structure was characterized and their electric transport properties were studied by temperature-dependent Hall and Seebeck measurements. The HEA films show a solid solution with an fcc structure. The residual electrical...

Taking advantage of the high-energy-density microwave plasma environment as a unique 3D space for the self-assembly of free-standing nanostructures, a novel multifunctional platform for the continuous production of graphene and derivatives at the gram scale was developed. The platform is supported...

The majority of nanomaterials (NMs) used in commercial applications are likely to enter the wastewater stream and reach wastewater treatment plants (WWTP). Studies have shown high association of NMs with sewage sludge therefore soils can be a sink for NM pollution making terrestrial organisms...

Dypingite has recently been found to have promising applications in material and environmental sciences. However, its exploitation is limited due to its ambiguous identification via powder X-ray diffraction (PXRD), which is caused by the occurrence of several phases with similar structures and PXRD...

Pseudotachylytes in the metamorphosed anorthosites of the Lofoten archipelago, Norway, preserve a record of seismic rupture in dry lower crust at temperatures and pressures of 650–750 °C and 0.8 GPa. Transient gigapascal-level stresses are suggested from microstructural evidence, however such high...

Pharmaceutical substances present in soils and water supplies pose a significant risk to the ecosystem. Solar light-driven photocatalysis with titanium dioxide (TiO₂) nanophotocatalysts has been widely explored for the degradation of these substances in aquatic resources. However, the lack of...

The plasmonic properties of gold nanoparticles (AuNPs) are a promising tool to develop sensing alternatives to traditional, enzyme-catalyzed reactions. The need for sensing alternatives, especially in underdeveloped areas of the world, has given rise to the application of nonenzymatic sensing...

Alnico magnets have gained renewed interest in the search for rare-earth free permanent magnets due to their high thermal stability and magnetisation. However, the limited coercivity of these shape-anisotropy-based alloys constrains their performance. Their coercivity can be improved by tailoring...