Energy filtering has been suggested by many authors as a means to improve thermoelectric properties. The idea is to filter away low-energy charge carriers in order to increase Seebeck coefficient without compromising electronic conductivity. This concept was investigated in the present paper for a...
The fraction of organic matter present affects the fragmentation behavior of sialoliths; thus, pretherapeutic information on the degree of mineralization is relevant for a correct selection of lithotripsy procedures. This work proposes a methodology for in vivo characterization of salivary calculi...
Titanium dioxide was synthesized on glass substrates from titanium (IV)isopropoxide and hydrochloride acid aqueous solutions through microwave irradiation using as seed layer either fluorine-doped crystalline tin oxide (SnO2:F) or amorphous tin oxide (a-SnOx). Three routes have been followed with...
A CuCrFeTiV high entropy alloy was prepared and irradiated with swift heavy ions in order to check its adequacy for use as a thermal barrier in future nuclear fusion reactors. The alloy was prepared from the elemental powders by ball milling, followed by consolidation by spark plasma sintering at...
The present work explores the concept of high-entropy alloys to design FeCoNi-based oxides suitable for functional applications. Fundamental changes in electronic behavior produced by metal substitution and variable oxygen content were screened to investigate the potential of these materials for...
In this study, the effects of aged Ag and TiO2 nanoparticles (NPs), individually and as a mixture, in wastewater relative to their pristine counterparts on the development of the copepod nauplii (Tisbe battagliai) were investigated. NP behavior in synthetic wastewater and seawater was...
The increasing need for energy storage systems in the transition to renewable energy is accelerating the search for sustainable raw materials, with hyperaccumulator plants offering unique, untapped sources by capturing and processing electroactive metals like nickel (Ni) into their carbon matrix. In...
Residual stresses in multilayer thin coatings represent a complex multiscale phenomenon arising from the intricate interplay of multiple factors, including the number and thickness of layers, material properties of the layers and substrate, coefficient of thermal expansion (CTE) mismatch, deposition...
Although various alloy systems have been explored for additive manufacturing (AM) during the past decade, introducing a new alloy remains a challenging task. Most of the materials require iterative builds, for investigating numerous parameters and determining a viable and repeatable process window...
A galvanic deposition method for the in-situ formation of Pt nanoparticles (NPs) on top and inner surfaces of high-aspect-ratio black TiO2-nanotube electrodes (bTNTs) for true utilization of their total surface area has been developed. Density functional theory calculations indicated that the...
A defect engineering strategy is employed to produce defective calcium‐doped TiO 2 nanomaterials (Ca:TiO 2 ), which are subsequently incorporated into cellulose‐based membranes. Structural defects, including vacancies, stacking faults, grain boundaries and voids emerged from the interplay between...
Dypingite is a naturally occurring mineral, with an empirical formula Mg₅(CO₃)₄(OH)₂·5H₂O, and a member of the hydrocarbonate mineral group. It was named in 1970 by Gunnar Raade, after the Dypingdal serpentine-magnesite deposit in Norway ( ). Recently, it was reported that this mineral can...
Graphene-based composite materials have attracted much attention for a range of applications in various fields, including electronics, sensing, catalysis, energy storage and conversion. Single-step large-scale microwave plasma synthesis of graphene and nitrogen-doped graphene (N-graphene) composite...
Tungsten and beryllium were foreseen to be the plasma facing materials (PFMs) for the first wall and divertor in ITER. Particles eroded from PFMs surfaces will be transported by the plasma and co-deposited in different locations of the vessel walls. Elemental mixing in the exposed surfaces enables...
Composite co-ionic ceramic electrolytes that combine proton and oxide ion conductors hold potential for co-electrolysis of CO2 and H2O for syngas production due to flexible control of the transport numbers of the two charge carriers. Contrary to purely oxide ion co-electrolysis, co-ionic co...
Technology and Science (NTNU) Prof. Liyuan Deng; North Carolina State University (NCSU-USA) Prof. Richard Spontak; University of Zaragoza (UZ) Prof. Patricia Gorgojo; Institute European of Membranes (IEM-CNRS, France) Prof. Mihail Barboiu. ...
...as a new solar cell technology. Project team: SINTEF Materials and Chemistry: Ole Martin Løvvik (Project leader) Spyros Diplas Annett Thøgersen Patricia A. Carvalho SINTEF ICT: Daniel N. Wright University of Oslo: Bengt Svensson Linköping University: Mikael Syväjärvi Saint-Gobain Ceramic Materials...
...magnetic materials research. Create first-principles tools for exploration of entropy-stabilized alloys. bilde Project partners: SINTEF: Ole M. Løvvik, Patricia A. Carvalho, Branson Belle, Matthias Schrade, Spyros Diplas (Material Physics-Oslo), Amin S Azar (Material Processing and Modelling) University of...
Nature-inspired water filters for heavy metal sequestration Anton Sednev-Lugovets1, Yang Lu2, Ørnulv Vistad3, Håkon Austrheim4, Henrik Friis2, Patricia A. Carvalho3 and Matylda N. Guzik1 1 University of Oslo, Department of Technology Systems, Kjeller, Norway 2 University of Oslo, Natural History...
Crude oil accidentally spilled into the marine environment undergoes natural weathering processes that result in oil components being dissolved into the water column or present in particulate form as dispersed oil droplets. Oil components dissolved in seawater are typically considered as more...