Søk i SINTEF

...particles and solutes on the strength, work-hardening behaviour and ductile fracture of four different aluminium alloys in the as-cast and homogenised condition is investigated in this paper. These alloys contain different types and volume fractions of particles, i.e. constituent particles and dispersoids...

...simulated, checked and validated in short incremental and iterative cycles. This also makes them a powerful asset for important process improvement decisions such as resource allocation, deadlock identification and process management. In this paper, we propose a framework that combines Aspect and Model-Driven...

ISBN: 978-88-87971-01-9...

In the current work, slag formation by dissolution of limestone and iron oxide in quartz/ cristobalite/ condensate were investigated. SiO2-CaO and SiO2-FeO binary slags achieve equilibrium from 1400 to 1700 °C with extra SiO2, and the composition does not seem to change with location. Formed slag does...

Sustainability, well-being, and inclusion are critical objectives for human societies to thrive, but achieving them requires transformative changes in economic, political, and social systems. While ecological economics provides a unique perspective for addressing sustainability challenges, it needs to...

...maintenance, and repair (IMR) using remotely operated vehicles (ROVs), with particular focus on shore-based control rooms and implications for integrity assessment of subsea facilities. The increased use of such concepts leads to lower carbon footprint, improved working environment, and greater flexibility...

...alternative reductant and carbon capture and storage (CCS) are key mitigation strategies of FeMn production, yet their environmental performances are still unexplored. This study evaluates the possible environmental co-benefits and trade-offs of replacing metallurgical coke with biocarbon, with and without CCS...

In order to accelerate the deployment of capture and storage (CCS), engineers need experimentally validated models, among other things, to predict the mass flow rate in process equipment and flow restrictions like valves, nozzles and orifices. There are few available, relevant data for choked flow...