Søk i SINTEF

...maintenance, and repair (IMR) using remotely operated vehicles (ROVs), with particular focus on shore-based control rooms and implications for integrity assessment of subsea facilities. The increased use of such concepts leads to lower carbon footprint, improved working environment, and greater flexibility...

...alternative reductant and carbon capture and storage (CCS) are key mitigation strategies of FeMn production, yet their environmental performances are still unexplored. This study evaluates the possible environmental co-benefits and trade-offs of replacing metallurgical coke with biocarbon, with and without CCS...

In order to accelerate the deployment of capture and storage (CCS), engineers need experimentally validated models, among other things, to predict the mass flow rate in process equipment and flow restrictions like valves, nozzles and orifices. There are few available, relevant data for choked flow...

This paper reports on process synthesis and economics of combined methanol and CHP (combined heat and power) energy production from crude biooil, waste glycerol produced in biodiesel factories and biomass wastes using integrated reactor design for hydrogen rich syngas. This new process consists of three...

...heterogeneous nature of solid biomass fuels makes their combustion a substantial challenge compared to the more traditional fuel types such as fossil fuels and natural gas. Many studies found in the literature attempt at identifying enhancements in fuel properties of biomass after a thermal pretreatment step...

...various failure modes—spontaneous, missing or unwanted operation. The latter two types of failures only occur when an initial failure has happened, and thus are more likely to happen when the probability of failure of transmission lines is high, such as in an extreme weather scenario. This causes an...

SupraLog can contribute to increased European competitiveness and sustainability by developing, testing and validating a set of practical, robust and user friendly indicators for benchmarking European logistics. As a result of EU expanding eastwards, and an opening Russian economy, the European region is currently...

Statistical filter based sensor and data acquisition (DAQ) fault detection is presented in this study. The parameters of a large-scale data set of ship performance and navigation information are considered as statistical distributions and principal component analysis (PCA) is used to identify the hidden...

...required for operating Maritime Autonomous Surface Ships (MASS). To assure the safety of MASS operations, the effective identification of potential objects and target ships interacting with the own MASS is quintessential. This study proposes a systematic method to identify the items interacting with the own...

...safety and traceability. The final agreement was signed in 2007. Two round table meetings took place in Japan in 2005 and 2006. In this period several research and industrial delegations visited SINTEF and Nofima. Since 2005, NRIFS (National Research Institute of Fisheries Science, Yokohama) and SINTEF...