Søk i SINTEF

...of computational tools for the design, analysis and optimization of functional products. An isogeometric approach is applied for selected manufacturing application areas (cars, trains, aircraft) and for computer-aided machining. Computer Aided Design and numerical simulation algorithms are vital technologies...

...over the pipe cross section was investigated on differently coloured and highly flowable concrete mixes flowing through pipes of different materials (rubber, steel, acryl). First, uncoloured (gray) concrete was poured through the pipe and the pipe blocked. Similar but coloured (black) concrete was then poured...

The work-hardening and ductility of an artificially aged AA6060 aluminium alloy were studied based on tensile tests of smooth and notched cylindrical samples. The alloy was tested after three processing steps, each followed by artificial aging. These processing steps were casting and homogenization, extrusion...

...of frozen water deposition and its physical behaviour, separating ice and snow in adhesion and accretion. This is done in order to lay a foundation on which to introduce a framework for classification of snow- and icephobic surfaces. Such a classification empowers users and producers of such surfaces...

...strengthened in the recent years. Thus, the use of tape for tightening connections and overlaps in the wind barrier and vapour barrier layer has become more and more common. Since these products are covered by a façade cladding and hence difficult to access, they need to maintain their performance level over...

Many different factors contribute to elapsed runtime of reservoir simulators. Once the cases become larger and more complex, the required wait time for results can become prohibitive. This chapter discusses three features recently introduced into the MRST AD-OO framework to make simulation of large cases...

...infrastructures are undergoing a process of digital transformation which entails an increasing integration between the physical and cyber layers of the system. This integration brings efficiency and monitoring advantages, but it also exposes water systems to a new threat surface that includes cyber-attacks. Formed...

...process (fuel, steam/CO₂, and air stages) for syngas production from methane in the fuel stage and H₂/CO production in the steam/CO₂ stage using a lanthanum-based oxygen carrier (La0.85Sr0.15Fe0.95Al0.05O3). Experiments were performed at temperatures between 750–950 °C and pressures up to 5 bar. The...