- Forfattere
- Tore Leland-Try
- Rita Maria Ugarelli
- Hans Martin Eikerol
- Anette Kveldsvik Desjardins
- Marius Rokstad
- Kamal Azrague
- Jonny Ødegård
- Sveinung Sægrov
- Tom Baade-Mathiesen
- År
- 2017
- Type
- Foredrag
Søk i SINTEF
...investigated for the use as bipolar plate material for polymer electrolyte membrane fuel cells. The coating consisted of 45 vol% graphite, 5 vol% carbon black and 50 vol% epoxy binder. The coating was applied by a spraying technique followed by hot-pressing while the binder cured. An interfacial contact resistance...
- År
- 2014
- Type
- Vitenskapelig artikkel
Publikasjon
Peker ut veien videre
- År
- 2016
- Type
- Intervju
...electrodeposited onto a bipolar plate and subsequently joined with a gas diffusion layer through hot-pressing at a temperature around the melting point of tin. This procedure was optimised, depositing 30 μm of Sn onto the stainless steel bipolar plate before hot-pressing at 230 °C and 0.5 bar for 20 min. A contact...
- År
- 2018
- Type
- Vitenskapelig artikkel
...some of our research and innovations. We will report on our efforts in geophysical monitoring of near-wellbore events, such as leakage and cement integrity failure, using borehole wavefields. Additionally, we will discuss using wellbores as antennas during CSEM monitoring of CO2 and present the latest...
...is to prepare the ground for large-scale implementation of CO2 capture in the European cement industry. The project has been running for 3,5 years, and will be concluded the 31st of October. https://blog.sintef.com/sintefenergy/final-stretch-cemcap/ ...
...familiar sight in Europe if a new pan-European research project achieves its objectives. The project also aims to provide more durable and reliable wind turbines. Industry and research communities from five different countries are aiming to develop fibre reinforced plastic materials that are more resistant...
...age range have the highest rate of abortions in Norway. In order to determine whether free hormone-based contraception changes contraception habits and abortion rates among women in this age group, the Directorate of Health asked SINTEF to carry out a project in which 20-24 year-old women in two Norwegian...
FORSEL will develop tools and methodologies that will help Norwegian grid companies to utilize the opportunities for flexibility in the power grid and make good choices when it comes to future load and the connection of new electricity customers to the power grid. FORSEL's overall goal is to make the...
...by SINTEF Energy Research and TU Delft shows that implementing CCS in industrial facilities can result in significant CO₂ reductions at a minimal cost to the public. These findings have been published as a paper “Is CCS really so expensive? An analysis of cascading costs and CO₂ emission reduction of...
Project web
nextgenFCmat
The main objective of nextgenFCmat is to facilitate the development of fuel cells with low weight, compact design and low cost...
- År
- 2021
- Type
- Foredrag
...physical and virtually connected due to a more modern and mobile world, and new technologies for collaboration and communication, such as mobile phones, satellites and internet. Next era will likely be the introduction of autonomy that is still in its start phase. By increased global mobility and transport...
- År
- 2020
- Type
- Vitenskapelig kapittel
- Forfattere
- Roman Tschentscher
- År
- 2020
- Type
- Foredrag
- Forfattere
- Franz Georg Fuchs
- År
- 2022
- Type
- Konferanseforedrag
- År
- 2016
- Type
- Fagbok
- Forfattere
- Per Snorre Daling
- År
- 2011
- Type
- Konferanseforedrag
- Forfattere
- Fatemeh Moeinikia
- Kjell Kåre Fjelde
- Arild Saasen
- Torbjørn Vrålstad
- År
- 2015
- Type
- Vitenskapelig artikkel
Publication
Characterising physical- and photodegradation of polystyrene and polyethylene microplastic particles
We investigate the physical- and photodegradation of microplastic (MP) particles and attempt to understand which MP physicochemical properties exert the most significant influence on these processes. Polystyrene (PS) and polyethylene (PE) MPs are used to study the effect of polymer composition on degradation...
- År
- 2017
- Type
- Konferanseposter
Invited lecture...
- År
- 2008
- Type
- Konferanseforedrag