Til hovedinnhold

Maxime Thys

Seniorforsker

Maxime Thys

Seniorforsker

Maxime Thys
Telefon: +47 462 73 038
Avdeling: Skip og havkonstruksjoner
Kontorsted: Trondheim

Publikasjoner og ansvarsområder

Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1762651

Model testing of offshore structures has been standard practice over the years and is often recommended in guidelines and required in certification rules. The standard objectives for model testing are final concept verification, where it is recommended to model the system as closely as possible, and...

Forfattere Thys Maxime Fontanella Alessandro Taruffi Federico Belloli Marco Berthelsen Petter Andreas
År 2019
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1754729

Validated hydrodynamic load models for large-diameter support structures are increasingly important as the industry moves towards larger offshore wind turbines. Experiments at 1:50 scale with stiff, vertical, bottom-fixed, extra-large (9m and 11m diameter full-scale) monopiles in steep waves are con...

Forfattere Hoseini Dadmarzi Fatemeh Thys Maxime Bachynski Erin Elizabeth
År 2019
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1699816

The responses of a monopile offshore wind turbine subjected to irregular wave loads are investigated numerically and experimentally, considering a range of sea states. An extensive experimental campaign was carried out on a fully flexible model, representative of a 5 MW offshore wind turbine, at 1:4...

Forfattere Bachynski Erin Elizabeth Thys Maxime Delhaye Virgile Roger
År 2019
Type Tidsskriftspublikasjon
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1677273

This article presents the Real-Time Hybrid Model (ReaTHM®) tests that were performed on a 10-MW semi-submersible floating wind turbine in the Ocean Basin at SINTEF Ocean in March 2018. The ReaTHM test method was used for the model tests to circumvent the limitations encountered when performing ...

Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1658488

As the offshore wind industry moves toward deeper water, with larger turbines and correspondingly larger monopile foundations, nonlinear loads from steep waves may become more important for the ULS design. Nonlinear numerical wave tanks (NWTs) for generating wave kinematics, to be used as input to i...

Forfattere Pakozdi Csaba Spence Silas John Byron Fouques Sebastien Thys Maxime Alsos Hagbart Skage Bachynski Erin Elizabeth Bihs Hans Kamath Arun
År 2018
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1635305

Model testing of offshore structures in ocean basins has been accepted as a necessary step for the validation and calibration of numerical models, as well as for final design checks in extreme environments. While offshore wind power makes no exception, model testing has not shown its full potential ...

År 2018
Type Tidsskriftspublikasjon