Søk i SINTEF

...high adsorption capacity and selectivity to this gas. Fundamental adsorption and diffusion parameters are required for designing a pressure swing adsorption (PSA) process with this adsorbent, which are lacking in the literature. In this work, adsorption Henry׳s law constants and reciprocal diffusion time...

Crystal structures of Sr4(Sr2Ta2)O11 and Sr4(Sr1.92Ta2.08)O11.12, synthesized by solid state reaction technique in dry and hydrated state have been studied mainly using Transmission Electron Microscopy. Due to the lesser ability of X-rays to probe details in oxygen sublattice, the change in crystal symmetry...

Internet of Things   Connect objects and devices to repositories and networks using simple, and cost effective systems of item identification so data about things can be collected and processed. Ability to detect changes in the physical and environmental status of things, using sensor technologies.Internet...

This paper aims to address the increasing risk of water and flood damages, study regulations of insurance with regard to these damages, and how to strengthen the insurance items to deal with the challenges in a changing climate and dynamic society. Water-related damages are categorised into several types...

Sæther G.G.: ReprintPaper no.19-01, EURAM 6th Annual Conference (Energizing European Management)...

Ice doped with from 1 to 1000 ppm HCl, HBr, HI og NaNO3 has been studied with 1H-HMR methods. The spectrum consists in general of a small narrow peak superimposed on a broader peak....

...samples were produced with glass/vinylester and carbon/epoxy in tubular section by filament winding. Split disk and biaxial tests were used to evaluate the basic in plane material properties. A new design for the biaxial test was developed. The end tabs and fixture were made in order to reduce the stress...

...orchestration and response (SOAR) approaches have primarily focused on specific layers of systems, such as Intrusion Detection Systems, the network layer, or the application layer. We aim to find the gaps in the existing SOAR approaches for IoT/CPS-based systems, especially critical infrastructures, and propose...

...chemistry and other properties. It is well known that the properties of Mn ore have a large influence on the technology and yield of Mn alloy production. This work aims to characterize Mn ore and slag properties for the production of ferromanganese (FeMn) through a prereduction with hydrogen (H₂) and subsequent...

...multiscale and multiphysics modelling of Solid Oxide Fuel Cells (SOFCs) by combining physics-based simulations with data-driven techniques. The modelling approach is tailored to specific end-use scenarios, ensuring that parameter selection aligns with operational requirements for accurate and efficient...