Prosjekter
Laboratorier
Ekspertise
Publikasjoner
- Impact of hydration on hydrogen sorption in clay minerals and shale caprocks: Implications for hydrogen energy and waste storage
- Scaling up 3D printed hybrid sorbents towards (cost) effective post-combustion CO2 capture: A multiscale study
- Thermal and/or Microwave Treatment: Insight into the Preparation of Titania-Based Materials for CO2 Photoreduction to Green Chemicals Les publikasjonen
- The CO2 Capture System with a Swing Temperature Moving Bed
- Simulation and optimization of fixed bed and moving bed TSA processes for post-combustion CO2 capture.
- Thin-film composite mixed-matrix membrane with irregular micron-sized UTSA-16 for outstanding gas separation performance
-
CO
2 capture from flue gases in a temperature swing moving bed - Evaluation of MBTSA technology for CO2 capture from waste-to-energy plants Les publikasjonen
- Respirable stone particles differ in their ability to induce cytotoxicity and pro-inflammatory responses in cell models of the human airways Les publikasjonen
- 3D Printed PEI Containing Adsorbents Supported by Carbon Nanostructures for Post-combustion Carbon Capture From Biomass Fired Power Plants Les publikasjonen
Annen formidling
- Evaluation of Mmen-Mg2(dobpdc)-MOF and Lewatit Adsorbents for Direct Air Capture by a Modular Vacuum Temperature Swing Adsorption (VTSA) Process
- Q&A: Investigating Direct Air Capture (DAC)
- Status on Post-Combustion Technologies
- 3D Printed PEI containing Sorbents for Post-Combustion CO2 Capture
- Preparation of MOF spheres for use in a moving-bed temperature swing adsorption pilot for post-combustion CO2 capture
- Performance of Lewatit adsorbent at dry conditions in various contactor/regeneration environments in a NGCC context; a comparative study
- Carbon capture with nano-porous adsorbents
- The use of MOFs as adsorbents for CO2 capture - what is needed?
- InnCapPlant (Part 2): Adsorption-Based CO2 Capture From a Thermal Power Plant Under Variable Load Operation
- Initial operation of a continuous lab-scale MBTSA pilot using activated carbon adsorbent