Til hovedinnhold

Bending machine for testing reliability of flexible electronics

Bending machine for testing reliability of flexible electronics

Kategori
Del av bok/rapport
Sammendrag
A novel bending machine has been designed and tested. It enables flexible electronics to be subjected to repeated bending with constant radius and tension. In-situ electrical characterization can give accurate analysis of lifetime distributions if sufficiently many samples are ran to failure, allowing reliability prediction models to be developed. Four sets of test samples with different combinations of substrate, routing, interconnect technology and components were examined. A poor level of reliability was observed when using anisotropic conductive paste to form interconnects, whereas a significantly higher level of reliability was observed when using a bismuth-tin solder paste. The assembly of larger components resulted in shortened time to failure, whereas increasing the bending radius prolonged the observed lifetimes.
Oppdragsgiver
  • Norges forskningsråd / 245498
Språk
Engelsk
Forfatter(e)
Institusjon(er)
  • SINTEF Digital / Smart Sensor Systems
  • Sverige
År
2017
Forlag
IEEE
Bok
2017 IMAPS Nordic Conference on Microelectronics Packaging (NordPac 2017), NORDPAC 2017, Gothenburg, Sweden, 18-20 June 2017
ISBN
9781538630563