Til hovedinnhold

Daniel Blucher

Senior forretningsutvikler

Daniel Blucher

Senior forretningsutvikler

Daniel Blucher
Telefon: 930 06 103
E-post:
Avdeling: Materialer og nanoteknologi
Kontorsted: Trondheim

Publikasjoner og ansvarsområder

Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1322725/

The atmospheric corrosion of several Mg–Al alloys was investigated at − 4, 4 and 22 °C. The rate of corrosion increased with increasing temperature and decreasing Al content. Also, the effect of temperature became stronger with increasing Al content. The cast microstructure was found to influence...

Forfattere M. Esmaily Daniel Blucher J.-E. Svensson Mats Halvarsson L.G. Johansson
År 2016
Type Vitenskapelig artikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1401731/

This paper reports the recent findings on corrosion resistance of a new centrifugally cast austenitic corrosion resistant alloy (CRA), 46Ni-35Cr-9Mo, against severe sour gas environment. The sour service corrosion validation was carried out by sulphide stress cracking (SSC) using autoclaves with...

Forfattere Torstein Lange Daniel Blucher Shankar Venkataraman Dietinde Jakobi Henrik Asteman Roy Johnsen
År 2016
Type Vitenskapelig artikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1250498/

In this study, ultra-fine grained (UFG) structure was produced in the stir zone (SZ) of AA6005-T6 alloy joints using friction stir processing (FSP) cooled by liquid nitrogen (N2). Conventional friction stir welding (FSW) was used to fabricate reference joints. The corrosion properties of the cooled...

Forfattere Mohsen Esmaily Daniel Blucher Jan-Erik Svensson Mats Halvarsson Lars-Gunnar Johansson Mehrdad Shahabi-Navid
År 2015
Type Vitenskapelig artikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1249114/

The atmospheric corrosion behavior of alloy AZ91D produced by a semi-solid metal (SSM) technique and by conventional high pressure die casting (HPDC) was investigated for up to 1176 hours in the laboratory. Alloy AZ91D in the SSM state was fabricated using a rheocasting (RC) technique in which the...

Forfattere Mohsen Esmaily Nooshin Mortazavi Seyedeh Jan-Erik Svensson Mats Halvarsson Daniel Blucher Anders E.W. Jarfors Magnus Wessén L.G. Johansson
År 2015
Type Vitenskapelig artikkel