Testing floating wind turbines in hydrodynamic laboratories is challenging due to 1) poor wind field modelling, 2) Froude-Reynolds scaling conflict and impossibility to apply correct rotor loads using a physical rotor. Objective: The project has been developing hybrid testing, i.e. a testing method...
This is a large industrial project between Nobina AB in Sweden and SINTEF Optimisation. The project focuses on building a personnel scheduling engine - SkiftOpt - that matches bus drivers to shifts. The engine creates a work schedule for personnel by matching bus drivers to shifts for a given planning...
...page you will find some information about the project, and links to follow-up activities by universAAL partners. universAAL's goal is to develop a platform for Active Assisted Living (AAL). The project worked with architectures, data models and reference implementations of the platform. universAAL project...
...benthic fauna. The seafood and marine technology company Ava Ocean AS has addressed this issue and has now developed a gentle method for selective harvesting of benthic marine organisms. It has been documented that there is little or no negative impact on the seabed sediment and fauna when using the new...
The over all visual impression and the colour are important parameters for the consumer when buying fish. Different markets have different requirements to the salmon’s redness. SINTEF ICT and Matforsk have together with QVision developed a scanner that classifies the colour of fish fillets based on the...
..."Sea Trials and Model Tests for Validation of Shiphandling Simulation Models" (SimVal) er et prosjekt under MAROFF programmet i forskningsrådet. Hovedmålet med prosjektet er å utvikle en metode for validering av numeriske skipsmodeller som verktøy for studier av skipsmanøvrering, ytelse på dypt og i...
European Commission) power markets. To support the main objective, the project had the following sub goals: Identification of present balancing resources and estimation of balance costs in the Northern part of Europe. Identification of the ‘solution space’: what goals would innovative balancing arrangements...
IMPACT (Innovative Methods for Wave Energy Pathways Acceleration through Novel Criteria and Test Rigs) was a European project for the development and demonstration of a next-generation testing approach for Wave Energy Converters (WECs). The ocean is a renewable energy resource with many possible ways...
...with the net suspended beneath the rings. Such structures will follow the movements of the waves and the net changes its shape with the current. This has been a source of wear and tear on the sea-cage, and increases the risk of escapes. The production volume is also affected. The development from conventional...
The Ion4Raw project proposes an energy-, material- and cost-efficient new mineral processing technology to recover by-products from primary sources by means of innovative Deep Eutectic Solvent (DES) ionic liquids and advanced electro recovery, in one single step. The long-term availability of mineral...
...obtained by use of less cement and/or Portland clinker in the concrete. Furthermore, the objective is that Zero Carbon emission Concrete (ZCC) shall obtain a market share of at least 40% in Norway three years after the project ends. This project comprises R&D of cement- and concrete materials as well as...
The OCMOL project aims at developing an innovative chemical route adapted to the exploitation of small gas reservoirs from both a technical and an economic point of view. The corresponding process is, among others, based on oxidative coupling of methane followed by its subsequent oligomerization to liquids...
...to investigate and estimate uncertainties in short-term predictions of the spread and fate of oil spill at sea. SINTEF Ocean has for years developed the OSCAR — a software for predicting the spread and fate of oil spill at sea which is used operationally in emergency situations and for risk assessment...
SUMBAT will be the first step to create the most sustainable battery value chain in the world, established in Norway. The project's expected results and effects Reduce CO2-footprint from Norwegian battery production Commercialization of Norwegian battery industries Enable the emerging Norwegian battery...
...both the total energy demand [kWh] and power demand [kWh/h] for the customer type and different end-uses. The increased knowledge will be achieved through establishing mathematical and statistical methods for calculating both the total electricity demand (bottom-up) and the specific electricity demand...
The objective of the project is to develop a new method for producing better and less expensive lab-on-a-chip systems, e.g. for medical diagnostics. The project is in the field of fabrication of microfluidics-based lab-on-a-chip devices, e.g. for in-vitro medical diagnostics. Such a lab-on-a-chip is...
...cases, integrated thermal energy storage systems are an effective solution to extract excess thermal energy from a process, store it for a given time and yield back thermal energy at a later moment through a passive heat transfer process. The focus of PCM-Eff is on latent heat storage, based on heat absorption...
Bioproduction: Overview of Biological and Chemical Hazards in Fish Sludge and Their Potential Fate via Ingestion by Invertebrates Retention of prions in the polychaete Hediste diversicolor and black soldier fly, Hermetia illucens, larvae after short-term experimental immersion and feeding with brain homogenate...
...samarbeidspartnerne som er listet opp på høyre side. Prosjektets engelske tittel: Development and assessment of novel technologies improving the fishing operation and on board processing with respect to environmental impact and fish quality (DANTEQ) Samarbeidspartnere Norges forskningsråd Fiskeri- og havbruksnæringens...
In SEQOP, SINTEF, NOFIMA and CFEED will assess if selectively bred lines of Acartia tonsa also display genetic alterations. CFEED produces copepod eggs for the marine larviculture industry. Industrial copepod production is a novel business concept still in early stage, and CFEED is to date the only...