Bildegalleri Photo: SINTEF/Geir Mogen About the laboratory SINTEF Energy Lab contains laboratories, offices and conference facilities. Each of the laboratories is tailored to its specific field...
We can test and characterise a wide range of different materials in our laboratories. Materials and components are bent, tensioned and compressed, and go through fracture- and fatigue tests....
The Ocean Basin is a cutting-edge facility designed for hydrodynamic model testing of ships and marine structures and full-scale hydrodynamic testing of components such as electric cables. With...
The Towing Tank is designed for hydrodynamic scaled-model testing of ships and marine structures. The high-capacity wave maker and adaptable towing carriage allows for testing of large-scale...
For investigating liquid loads in tanks and on custom geometries, SINTEF has developed a sloshing laboratory with two motion platforms and a drop rig for deterministic water impacts. The motion...
Scandinavian Association for Testing of Electric Power Equipment. Member of Short-Circuit Testing Liaison (STL). SATS Certification is an association of manufacturers' and independent test...
In the welding laboratory, we perform hyperbaric welding, weldability testing and weld thermal simulations. Welding Hyperbaric welding represents today the dominating activity. Two different...
NMR (Nuclear Magnetic Resonance) spectroscopy is essential i many fields of research and science like e.g. chemistry, physics, biochemistry, and medicine. The method exploits the magnetic...
In the lab in Oslo we can test membranes, fuel cells and electrolysers under real operating conditions. Experiments can be carried out at pressures up to 30 bars and temperatures up to 1100°C....
The new Circulating Water Tunnel (CWT) is a test facility dedicated to optical measurement techniques and flow visualization. The tank's measurement section is completely transparent and can...
The laboratory performs measurements of thermodynamic properties for solvents used for purification of various industrial gases. This includes phase equilibria, solubility of CO2, H2S and...
Solvent studies is essential in the work with developing post combustion CO2 capture technologies. Solvent degradation may lead to a significant loss of solvent performance (solvent losses,...
High temperature materials are commonly defined based on their maximum application temperature with respect to the materials melting temperature, which strongly depends on the applied...
Modern production of high quality metallic materials requires advanced knowledge of pyro-metallurgical processes. SINTEF optimises metallurgical processes and raw materials, using a combination...
The robotic screening facility at SINTEF are optimized for high throughput analytical and cultivation work and enables us to process of thousands of samples or cultures per day. Our three liquid...
The catalysis pilot lab is a laboratory designed to conduct experimental campaigns that simulate industrial conditions for a range of catalytic processes. This plant primarily focuses on the...
SINTEF ACE is a full-scale laboratory facility designed to develop and test new aquaculture technologies. Facility users are researchers and others conducting practical experiments and tests both...
This laboratory will be used both in research and development to identify and improve manufacturing unit properties during network failures. Objectives Gain new knowledge Develop and verify...
Our laboratory applies a range of analytical methods in the fields of microbiology, molecular biology and medical microbiology. Our activities focus primarily on the biodegradation of...
This laboratory carries out analyses designed to assess the behaviour and ultimate fate of oils in the marine environment. The method we apply is based on many years of experience. It is...