...opportunities and challenges with AI, data and robotics in the Energy sector and Inspection and Maintenance sector? Brussels, Belgium Rue Ravenstein 60, Bruxelles, 1000 Belgium The workshop is held in connection with an Adra event titled Future-Ready: On-Demand Solutions with AI, Data, and Robotics (ADR)...
...modernize and expand SINTEF’s simulation tool VOCSim. By implementing it in a modern programming language and developing new methods for calibration and uncertainty analysis, VOCSimPRO will enable emission analysis across the entire value chain—from production to storage and transport. Methane and other...
...2019 ble nok et godt år for instituttets vitenskapelige publisering Compatibility of liquid and solid insulation materials for high voltage subsea connectors IEEE transactions on dielectrics and electrical insulation 2019 ;Volum 26.(4) s. 1139-1145. Lesaint, Cedric Michel; Hølto, Jorunn; Sæternes, Hans...
With our medical technology, surgeons can see and operate within the body. This surgical technique is possible because the surgeon navigates by advanced three-dimensional maps that show him the way around the inside of the body. 3D ultrasonic images enable the surgeon to see changes in the tissue during...
...cost by optimizing which maintenance task to perform when and in which order and with which ships and personnel. These types of advanced decision support system will push the industry from an ad hoc planning process to more structured, reliable and informed decision processes. Further development will be...
...of developing tailored numerical methods and open-source tools for modeling CO₂ storage since the early 2000s. We focus on models that offer both physical fidelity and computational efficiency to simulate long-term plume migration, trapping, pressure buildup, and rock deformation. Our methods are grounded...
...provision of mid-term and final reports, and project outcome summaries for publication on the BlueBio website. They will chair a management group that will have one representative from each partner, to ensure (i) cooperation between partners and between work packages, (ii) milestones and deliverables are...
About us In the group safety and reliability, we develop knowledge and solutions to ensure that the systems don’t fail. We know that is usually combined contributions from human, technology and organization that leads to accidents. Therefore, our team covers a wide variety of disciplines, but the common...
We investigate and develop ways of creating more efficient and reliable cooling systems using nanofluids and magnetic nanofluids (ferrofluids). These can be used for instance for cooling of power electronics, personal computers and solar cells, and for heat transport of solar heat. This not only takes...
...aircraft during take-off and landing. The objective is both to maintain the level of safety and to improve the capacity of airports. During take-off and landing, strong vortices are produced in the air on both sides of large aircraft because of the pressure difference between the upper and lower sides of the...
...new power plants and retrofit of existing power plants which are responsible for the majority of all anthropogenic CO2 emissions (worldwide, approx. 5,000 power plants emit around 11 GtCO2/year). CESAR focuses on post-combustion as it is the only feasible technology for retrofit and current power plant...
Professor Roland Span wins the SINTEF and NTNU CCS award 2019 Professor Roland Span of Ruhr-University Bochum, Germany, received the prestigious SINTEF and NTNU Carbon Capture and Storage (CCS) Award, honoring his extraordinary contributions and outstanding work in the field of carbon capture technologies...
...control?"; Oslo at 7th and 8th of May 2019. (See https://www.sintef.no/projectweb/hfc/moetereferat/) Presentations related to the theme of SMACS: 1-Trust, control, and communication in the transport network J. Lee /Univ. of Wisconsin 4-Automation: Control, Responsibility, Authority, and Trustworthiness B...
...develop concepts and solutions for utilizing flexible resources (DER = Distributed Energy Resources = Energy storage, distributed generation from renewable sources and demand response) indifferent market products and ancillary services, for increased observability between the distribution and transmission...
...conferences with presentations (and participants): - HFC meeting 2019, Theme: "Humans in modern transport systems - who is in control?"; Oslo at 7th and 8th of May 2019. (Presentations: https://www.sintef.no/projectweb/hfc/moetereferat/) Autonomy issues Trust, control, and communication in the transport...
The focus is on energy effi ciency in industrial processes, and the main sub-activities are (i) methodologies for analysis, design and optimization, (ii) improved equipment and cycles, and (iii) systems integration including industrial parks (clusters). The education activity takes place at diff erent...
...offers several pre and post conference tours with Hurtigruten (Coastal Express) and a pre conference tour to Svalbard/Spitsbergen. You may book your plane tickets to and from Tromsø with them. Also, you find pointers below to general information for a memorable extended stay. Pre and post conference tours...
...were tailored to the challenges addressed and the available computational resources. Consequently different shape modelling paradigms were employed within the different application domains and different systems. The need for communicating shape models within and between organizations has lead to standardization...
...advanced 3D and rich-media technology. This is no longer the case. Computer games drive the evolution of 3D technology aimed at improved visual effects, but with little or no connection to the underlying physics of natural objects or human-made artefacts. Advances in both mathematical theory and computational...
RIA 0 will enable strategic dialogue with advisory groups established in the centre (Scientific, Cities and Industrial), day-to-day management, and creating novel concepts and spin-off projects....