Til hovedinnhold

A metallized plastic feed horn with optimized smooth-walled profile and low cross polarization at 20/30 GHz

A metallized plastic feed horn with optimized smooth-walled profile and low cross polarization at 20/30 GHz

Kategori
Vitenskapelig foredrag
Sammendrag
For high volume products like a DVB-RCS terminal, manufacturing by plastic injection molding and metallization techniques are considered to be key technologies to make low cost ground terminals feasible. In this paper we report on the electrical design of a smooth-walled feed horn, where the horn profile is optimized to obtain low cross polarization both at 20 and 30 GHz. The optimized feed horn is manufactured by plastic injection molding and metallization techniques. The optimized horn has an aperture diameter of 38 mm, length 42.9 mm and is fed from an 11 mm diameter waveguide. The feed horn has XPD > 25 dB within the Rx-band and XPD > 32 dB within the Tx-band, and return loss is better than 25 dB in both bands.
Språk
Engelsk
Forfatter(e)
Institusjon(er)
  • SINTEF AS
  • Norges teknisk-naturvitenskapelige universitet
Presentert på
The Second European Conference on Antennas and Propagation
Sted
Edinburgh
Dato
11.11.2007 - 16.11.2007
Arrangør
IET
År