Til hovedinnhold
Norsk English

Effect of Anodic Bonding on Reliability of Sensors and MOS Circuitry

Sammendrag

We have investigated the effect of anodic bonding on silicon oxide by
measuring MOS capacitors situated in Pyrex cavities. We used two
different cavity depths, giving 1 µm or 200 µm vertical distance
between the gate electrode and the Pyrex. After bonding, we found that
the flat-band voltage of the capacitors situated in 1 µm deep cavities
had shifted towards more negative values. The shift corresponded to
6.6×1011cm-2 - 9.0×1011cm-2 increase in oxide charges area density. The
capacitors situated in 200 µm deep cavities showed a slight shift in
the opposite direction, which we attribute to thermal annealing of
oxide fixed charge. In addition, we observed that the current between
the gate and the substrate contact had increased after bonding. The
increase was by a factor between 20 and 150, depending both on cavity
depth and gate geometry. Some explanations for our observations are
suggested.

Kategori

Vitenskapelig foredrag

Språk

Engelsk

Forfatter(e)

  • Kari Schjølberg-Henriksen
  • Adriana C. Lapadatu
  • Geir Uri Jensen
  • Anders Bror Hanneborg
  • Henrik Jakobsen

Institusjon(er)

  • SINTEF Digital / Microsystems and Nanotechnology
  • Ukjent
  • Universitetet i Oslo

Presentert på

The 200th Electrochemical Society Fall Meeting

Sted

San Francisco, California

Dato

02.09.2001

År

2001

Vis denne publikasjonen hos Cristin