Til hovedinnhold
Norsk English

Effect of better insulation in Crystalox DS 250 furnace during melting and solidification on the furnace operation

Sammendrag

The process time and energy consumption are important factors when yield and cost for a process isconsidered. One possibility for controlling the heat flux in a Crystalox DS-250 furnace is to use a shutter underneath the crucible which can be opened or closed in controllable ways. Originally this shutter is normally made of graphite. This work shows what happens when the shutter is replaced by one made a material with heat conductivity approximately 40% lower than standard graphite material. The use of this material gave a reduction of the process time of 2.4 hour. This was in good agreement with theoretical modelling of the furnace where the reduction in process time was calculated to be 2.5 hour. It is also shown that for a cast run with standard temperature profile, the energy consumption during the complete cycle is reduced significantly.

Kategori

Vitenskapelig foredrag

Språk

Engelsk

Institusjon(er)

  • SINTEF Industri / Bærekraftig energiteknologi
  • SINTEF Industri / Prosessteknologi

Presentert på

25th European Photovoltaic Solar Energy Conference and Exhibition / 5th World Conference on Photovoltaic Energy Conversion

Sted

Valencia, Spain

Dato

06.09.2010 - 10.09.2010

År

2010

Vis denne publikasjonen hos Cristin