Til hovedinnhold

The effect of heat treatment and cooling rate on the properties of lightweight aggregates

The effect of heat treatment and cooling rate on the properties of lightweight aggregates

Kategori
Vitenskapelig artikkel
Sammendrag
Lightweight aggregates (LWA) were produced from clay in the laboratory. After firing different heat treatments and cooling rates were applied andthe resulting material was investigated with respect to strength and microstructure. Fast cooling led to the formation of micro cracks and weakenedthe material whereas slow cooling enhanced the strength of LWA. The residence time at temperatures between 700◦C and 900◦C led to differencesin average oxidation state of iron in the matrix phase leading to substantial changes in thermal behaviour of the matrix phase. The combinationof a highly oxidized shell and a reduced core proved to enhance the strength of LWA. A two hour heat treatment at 800◦C in air combined witha subsequent slow cooling rate (0.7◦C/min) applied to LWA produced in an industrial rotary kiln led to a strength increase of 114% compared tomaterial of the normal production without changing any other property.
Språk
Engelsk
Forfatter(e)
Institusjon(er)
  • Norges teknisk-naturvitenskapelige universitet
  • Weber
  • SINTEF Community / Arkitektur, byggematerialer og konstruksjoner
År
Publisert i
Journal of the European Ceramic Society
ISSN
0955-2219
Forlag
Elsevier
Årgang
34
Hefte nr.
5
Side(r)
1353 - 1363