Til hovedinnhold
Norsk English

The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy

Sammendrag

Effects of low Cu additions (≤0.10 wt pct) and 10 pct predeformation before aging on precipitates’ microstructures and types in a 6060 Al-Mg-Si alloy have been investigated using transmission electron microscopy (TEM). It was found that predeformation enhances precipitation kinetics and leads to formation of heterogeneous precipitate distributions along dislocation lines. These precipitates were often disordered. Cu additions caused finer microstructures, which resulted in the highest hardness of materials, in both the undeformed and the predeformed conditions. The introduced predeformation led to microstructure coarsening. This effect was less pronounced in the presence of Cu. The precipitate structure was studied in detail by high-resolution TEM and high angle annular dark-field scanning TEM (HAADF-STEM). The Cu additions did not alter the respective precipitation sequence in either the undeformed or the predeformed conditions, but caused a large fraction of β″ precipitates to be partially disordered in the undeformed conditions. Cu atomic columns were found in all the investigated precipitates, except for perfect β″. Although no unit cell was observed in the disordered precipitates, the presence of a periodicity having hexagonal symmetry along the precipitate length was inferred from the fast Fourier transforms (FFT) of HRTEM images, and sometimes directly observed in filtered HAADF-STEM images.
Les publikasjonen

Kategori

Vitenskapelig artikkel

Oppdragsgiver

  • Research Council of Norway (RCN) / 193619
  • NORTEM / 197405

Språk

Engelsk

Forfatter(e)

  • Takeshi Saito
  • Shinji Muraishi
  • Calin Daniel Marioara
  • Sigmund Jarle Andersen
  • Røyset Jostein
  • Randi Holmestad

Institusjon(er)

  • Norges teknisk-naturvitenskapelige universitet
  • Tokyo Kogyo Daigaku
  • SINTEF Industri / Materialer og nanoteknologi
  • Norsk Hydro ASA

År

2013

Publisert i

Metallurgical and Materials Transactions A

ISSN

1073-5623

Forlag

Springer

Årgang

44A

Hefte nr.

9

Side(r)

4124 - 4135

Vis denne publikasjonen hos Cristin