Til hovedinnhold

Sigmund Kyrre Ås

Forskningsleder

Sigmund Kyrre Ås

Forskningsleder

Sigmund Kyrre Ås
Telefon: 922 98 107
E-post:
Avdeling: Skip og havkonstruksjoner
Kontorsted: Trondheim

Publikasjoner og ansvarsområder

Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1786753/

Results of the fluid-structure co-simulations that were carried out as part of the FleksProp project are presented. The FleksProp project aims to establish better design procedures that take into account the hydroelastic behavior of marine propellers and thrusters. Part of the project is...

År 2020
Type Vitenskapelig artikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1767746/

Results of the fluid-structure co-simulations that were carried out as part of the FleksProp project are presented. The FleksProp project aims to establish better design procedures that take into account the hydroelastic behavior of marine propellers and thrusters. Part of the project is...

År 2019
Type Vitenskapelig foredrag
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1220917/

The state of the art in laser and laser-arc hybrid welding of thick steel components is reviewed, particularly with respect to possible applications in the oil and gas industry. The most relevant information comes from the shipbuilding industry, where the CO2 laser-GMAW process was taken in use...

År 2014
Type Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/934781/

Hyperbaric arc welding is a special application of joining the pipeline steels under seawater. In order to analyze the behavior of the arc under ambient pressure, a model is required to estimate the arc efficiency. A distributed point heat source model was employed. The simulated isotherms were...

År 2012
Type Vitenskapelig artikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/1018660/

Pipeline plays a very important role for transporting oil and gas from offshore fields to on-shore facilities. The recent trend of exploring oil and gas in deeper water exposes extreme challenges for pipeline laying as well as repair. For the sake of human health, the maximum depth of diver assisted...

År 2012
Type Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/850229/

Analytical and numerical approaches are used to model a gas metal arc welding (GMAW) process. In order to simulate the detailed aspects of material changes during the process, it is important to implement the correct size and distribution of the heat source. In this study the dimensions of a heat...

År 2012
Type Vitenskapelig artikkel