Til hovedinnhold

Magnar Hernes

Seniorforsker

Magnar Hernes

Seniorforsker

Magnar Hernes
Telefon: 930 03 738
Avdeling: Energisystemer
Kontorsted: Trondheim

Publikasjoner og ansvarsområder

Publikasjoner

Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1398826

The demands on reliable and fault tolerant power electronic devices are increasing. One opportunity to increase the IGBT short circuit ruggedness is to modify the thermal capacitance and the thermal resistance close to the chip and hence extend the possible short circuit duration. Therefore simulati...

Forfattere Tinschert Lukas Hernes Magnar Lutz Josef
År 2016
Type Tidsskriftspublikasjon
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1391562

This paper presents a numerical analysis of the temperature profiles within the semiconductor devices of modular multilevel converters (MMCs). These temperature profiles are essential for assessing the power-cycling lifetime of IGBT modules, which influences the converter reliability. An electro-the...

År 2016
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1385622

To facilitate operation of power electronics for subsea operation at ambient pressure components have to be submerged in a liquid. Equipment and schemes for testing of long term properties have been developed. Several techniques were used to investigate compatibility between a silicone gel and vario...

År 2016
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1236187

Reliability of Press-Pack IGBTs is a topic with limited published data and information. This paper presents results of a power cycling test with state-of-the-art high power devices. An accelerated lifetime test scheme was defined, and six out of eight devices were tested until failure. A microscopy ...

Forfattere Tinschert Lukas Årdal Atle Rygg Poller Tilo Bohlländer Marco Hernes Magnar Lutz Josef
År 2015
Type Tidsskriftspublikasjon
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1069606

Press-pack IGBTs are manufactured with a multi-layered structure composed of internal layers with different geometrical shape and physical properties. The device is clamped and an external pressure is applied on the housing in order to establish a sufficient electrical and thermal contact between th...

Forfattere Poller T Lutz J D'Arco Salvatore Hernes Magnar
År 2013
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1059214

The press-pack housing was initially available only in monolithic thyristors, diodes and GTOs for high power applications with strict reliability requirements. Due the technological developments of the last years, the IGBT became a common solution for power electronics converters including the highe...

Forfattere Poller T D'Arco Salvatore Hernes Magnar Årdal Atle Rygg Lutz J
År 2013
Type Tidsskriftspublikasjon
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1001235

Collection schemes based on DC technologies appear as a possible alternative to present layouts of offshore wind farms to reduce the installation and operational costs. Within these internal DC collection schemes, series connection can be particularly attractive when a sufficiently high number of un...

Forfattere D'Arco Salvatore Årdal Atle Rygg Hernes Magnar
År 2012
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+1001182

Power cycling lifetime in a semiconductor module accounts for the progressive fatigue of the device due to repetitive thermo - mechanical stress. Mathematical models for the lifetime express the number of cycles that the device can withstand before failing under predefined repetitive conditions. The...

Forfattere Poller T D'Arco Salvatore Hernes Magnar Lutz J
År 2012
Type Del av bok/rapport
Publikasjon
https://www.sintef.no/publikasjoner/publikasjon/?pubid=CRIStin+938677

At present two packages for IGBT devices are available for applications in the MW power range: the bonded power module and the press-pack housing. Power modules have been object of extensive research including their thermo-mechanical characterisation under variable operating conditions and the analy...

Forfattere Poller T Basler Thomas Hernes Magnar D'Arco Salvatore Lutz J
År 2012
Type Tidsskriftspublikasjon