Til hovedinnhold

Feeding a Gas Turbine with Aluminum Plant Exhaust for Increased CO2 Concentration in Capture Plant

Feeding a Gas Turbine with Aluminum Plant Exhaust for Increased CO2 Concentration in Capture Plant

Kategori
Vitenskapelig artikkel
Sammendrag
Aluminum production contributes to global CO2 emissions both due to the production process itself and due to the generation of electric power required for aluminum production. A concept is presented for increasing the CO2 concentration in the aluminum exhaust from ∼1% to ∼5% through the feeding of aluminum plant exhaust gas to a natural gas combined cycle (NGCC). The specific energy demand for CO2 capture is therewith reduced for both the aluminum plant and the NGCC. An evaluation was made of the impact the aluminum exhaust gas may have on the gas turbine and it is estimated that the most critical issues are corrosion due to SO2 in the aluminum plant exhaust gas and gas turbine inlet filter saturation, since the exhaust gas is saturated with seawater after the wet scrubber. A gas turbine inlet filter was tested for a period of five weeks, but a longer filter test period would be required for verifying filter integrity over time. In order to proceed, the viability of the concept should be evaluated by a gas turbine manufacturer. An alternative concept to evaluate for concentration of CO2 emissions could be to feed the aluminum plant exhaust gas to a boiler in a steam power plant.
Språk
Engelsk
Forfatter(e)
Institusjon(er)
  • SINTEF Energi AS / Gassteknologi
  • Lunds universitet
  • SINTEF Industri / Bærekraftig energiteknologi
  • SINTEF Energi AS / Termisk energi
  • SINTEF Industri / Prosessteknologi
  • Diverse norske bedrifter og organisasjoner
År
2015
Publisert i
Energy Procedia
ISSN
1876-6102
Forlag
Elsevier
Årgang
51
Side(r)
411 - 420