If acceleration of hydrogen innovation is adopted as a political goal, policy strategies need to take account of technology-specific challenges....
...integrations between CLC and MA-CLR were investigated, capitalizing on the steam in the CLC fuel reactor outlet stream to achieve highly efficient reforming in MA-CLR. This integration reduced the energy penalty as low as 3.6%-points for power production only (case 2) and 1.9%-points for power and hydrogen co-production...
...wake-vortex transport and decay systems. We build on the fact that in realistic application, there are uncertainties in initial and boundary conditions, model parameters, as well as measurements. Moreover, conventional nonlinear ROMs based on Galerkin projection (GROMs) suffer from imperfection and solution instabilities...
...storage activities, and in shale oil and gas extraction (SOGE) with carbon dioxide (CO2) stimulation fluid, CO2 comes into contact with shale rock and its pore fluid. As a reactive fluid, the injected CO2 displays a large potential to modify the shale’s chemical, physical, and mechanical properties...
...quality differ in small and large agile projects? We report from an explorative survey with 64 agile teams and 320 team members and team leaders, from 31 teams in small projects and 33 teams in large projects. For small projects, teamwork quality was considered by both team members and team leaders to primarily ...
Bleeding and sedimentation quantify the stability of fresh cement paste, whereas the addition of fillers and water reducers affect the stability. The effect of various types of fillers and water reducers was investigated by measuring bleeding, hydrostatic pressure and electroacoustic zeta-potential....
The effect of torrefaction severity (temperature and residence time) was studied on the thermal decomposition of different parts of Norway spruce (stem wood, stump, and bark). The volatile content of the torrefied samples was characterized by pyrolysis–gas chromatography/mass spectrometry (Py–GC/MS)...
Cost engineering and economic analysis are key elements of the performance assessment of carbon capture and storage (CCS) technology. The CCS field has seen noticeable advances in the transparency and rigor of costing studies, but there is still significant room for improvement in three major areas:...
...reinforced epoxy-mica samples including void enclosure with diameter of 10 mm. The PD-activity was examined at test frequencies from 0.1 Hz to 300 Hz, and the temperature was varied in the range from 20°C to 90°C. The PD inception voltage was found to be frequency independent, while the maximum apparent...