The Digicast project is dedicated to developing Intelligent Casting systems for Aluminium DC-casting by combining process know-how in the form of a digital process twin with visualization technologies.
The objective of the SCINDEEP project is to ensure effective risk assessment and risk handling of dermal exposure to ultrafine particles (UFPs) in industries were fugitive emissions of particles is a known risk.
Cobalt is used in many applications that support the shift to a low-carbon economy and the demand for cobalt is rapidly increasing. The CROCODILE project aims to drastically reduce the supply risk of cobalt for the European industries by increasing...
PreMa - Energy efficient, primary production of manganese ferroalloys through the application of novel energy systems in the drying and pre-heating of furnace feed materials, is a H2020 project aimed at demonstrating an innovative suite of...
The overall aim of “KPN Reduced CO2 emissions in metal production” is to develop the basis for reduced climate effects from the production of Si, FeSi, Mn-alloy and TiO2 slag to obtain 30% lower CO2 emission in 2030 and zero CO2 emission in 2050.
SUPER PV is pursuing an ambitious bus realistic goal for innovative PV system cost reduction and consequently significant LCOE reduction (26%-37%) by adopting hybrid approach combining technological innovations and Data Management methods along the...
AluMar will develop improved, seawater-resistant aluminium components for marine applications.
In the project, Solidification of Unseeded high-PERformance MULTIcrystalline Silicon (SUPERMULTI), we aim to secure the future competitiveness of REC Solar's tall multicrystalline ingots by influencing the recombination activity of structural defects...
This project aims to develop a radically new technology for harvesting low-temperature heat. Such heat is available in huge amounts from renewable sources (e.g. geothermal and solar) as well as in many industrial and domestic processes.
The goal of the Ensureal EU project, is to ensure zero waste production of alumina in Europe. This will be done by developing a zero-waste process for alumina production that can handle a wider range of bauxite than the existing process. The process...
Modern vehicles contain up to ten different heat-exchangers, sometimes more. Due to advanced requirements with respect to product's characteristics, aluminum brazed products are clearly dominant in the heat-exchanger industry. An increasing demand...
Forming of massive Aluminium in demanded geometries is performed through forming tools that apply high pressure on the material in certain way. Often, several forming steps are necessary. One reason is that the forming pressure would be too high to...
4REFINERY will develop and demonstrate the production of next generation biofuels from more efficient primary liquefaction routes integrated with upgraded downstream (hydro)refining processes to achieve overall carbon yields of >45%. The consortium...
The research project CPS Plant will develop a framework for the Norwegian approach for the digital manufacturing industry. The consortium consists of 3 Norwegian industry partners, Norsk Hydro, Benteler Automotive and Hycast, and SINTEF Digital and...
The project "Solar Fuelled Electric Maritime Mobility" by SINTEF seeks to demonstrate the feasibility and the social, economic and environmental benefits of solar-fuelled electric boat transport in Tunisia and the wider region.
Scandium (Sc) is one of the highest valued elements in the periodic table and an element which is usually grouped in REEs as it shares many characteristics with Yttrium. The SCALE project sets about to develop and secure a European Sc supply chain...
The PLATIRUS project aims at reducing the European deficit of Platinum Group Metals (PGMs), by upscaling to industrial relevant levels a novel cost-efficient and miniaturised PGMs recovery and raw material production process. The Platinum Group...
The primary objective of the POLYMEM project is to reduce the costs, energy and environmental impact of CO2 capture compared with existing technologies by developing and implementing the "next generation" polymeric membranes.