To main content

Odd-Geir Lademo

Chief Scientist

Odd-Geir Lademo

Chief Scientist

Odd-Geir Lademo
Phone: 920 52 901
Email:
Department: Materials and Nanotechnology
Office: Trondheim

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/1891041/

In geothermal energy, a huge potential lies in hydrothermal reservoirs where ultra-high temperature fluid (400-500 degrees Celcius) can be utilized to multiply the power production output. However, the aggressive fluids and high temperatures encountered in these geothermal reservoirs are tough...

Authors Nguyen-Hieu Hoang Odd-Geir Lademo Sturla Sæther Günther Kampfer Carsten Sørlie
Year 2021
Type Academic lecture
Publication
https://www.sintef.no/en/publications/publication/1899004/

Publication
https://www.sintef.no/en/publications/publication/1260922/

Sheet metal formability is traditionally described by the forming limit curve (FLC). Experimental FLCs are obtained by performing formability tests and determining failure strains. The strains are usually measured either by etching a grid on the sheet surface or by digital image correlation (DIC...

Authors Dmitry Vysochinskiy Térence Coudert Odd Sture Hopperstad Odd-Geir Lademo Aase Gavina Roberg Reyes
Year 2016
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/1046845/

Marciniak–Kuczynski and Nakajima tests of the dual-phase steel Docol 600DL (www.ssab.com/) have been carried out for a range of stress-states spanning from uniaxial tension to equi-biaxial tension. The deformation histories of the specimens have been recorded by digital images, and the displacement...

Authors Gaute Gruben Dmitry Vysochinskiy Térence Coudert Aase Gavina Roberg Reyes Odd-Geir Lademo
Year 2013
Type Academic article