To main content

Amin Shahrestani Azar

Research Scientist

Amin Shahrestani Azar

Research Scientist

Amin Shahrestani Azar
Phone: 968 33 668
Email:
Department: Metal Production and Processing
Office: Oslo

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/1867400/

Magnetic properties of High-Entropy Alloys based on the Fe-Co-Ni-Al-Mn system are reported. High-Entropy Alloys are cutting-edge technological materials containing five or more elements in relatively high concentrations (5–35 at.%) within one or several solid-state solutions. These solutions are...

Authors Anthoula Poulia Amin Shahrestani Azar Peter Svec Kalliopi Bazioti Branson Belle Anette Eleonora Gunnæs Spyridon Diplas Pavlo Mikheenko
Year 2020
Type Academic chapter/article/Conference paper
Publication
https://www.sintef.no/en/publications/publication/1823512/

AlSi10Mg processed by laser powder bed fusion is expected to have remarkable mechanical properties due to the dominant cellular microstructure. However, the as-processed material is often both anisotropic and containing significant residual stresses. To mitigate these problems, a retrofitted...

Authors Even Wilberg Hovig Amin Shahrestani Azar Mohammed Mhamdi Knut Sørby
Year 2020
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/1722298/

In this work, results of controlled detachment of (111) silicon by stress induced spalling (SIS) process, which is based on a gluing on a metallic stressor layer by an epoxy adhesive on top of a silicon substrate, are presented. It is shown that silicon foils mainly (1  ×  1) cm2 with different...

Authors Najoua Zayyoun Timothee Pingault Esidor Ntsoenzok Larbi Laanab Alexander G. Ulyashin Amin Shahrestani Azar Mohammed Mhamdi Jean-Philippe Blondeau Mohamed-Ramzi Ammar
Year 2019
Type Academic article