SINTEF search

...simulated, checked and validated in short incremental and iterative cycles. This also makes them a powerful asset for important process improvement decisions such as resource allocation, deadlock identification and process management. In this paper, we propose a framework that combines Aspect and Model-Driven...

ISBN: 978-88-87971-01-9...

In the current work, slag formation by dissolution of limestone and iron oxide in quartz/ cristobalite/ condensate were investigated. SiO2-CaO and SiO2-FeO binary slags achieve equilibrium from 1400 to 1700 °C with extra SiO2, and the composition does not seem to change with location. Formed slag does...

Sustainability, well-being, and inclusion are critical objectives for human societies to thrive, but achieving them requires transformative changes in economic, political, and social systems. While ecological economics provides a unique perspective for addressing sustainability challenges, it needs to...

...maintenance, and repair (IMR) using remotely operated vehicles (ROVs), with particular focus on shore-based control rooms and implications for integrity assessment of subsea facilities. The increased use of such concepts leads to lower carbon footprint, improved working environment, and greater flexibility...

...alternative reductant and carbon capture and storage (CCS) are key mitigation strategies of FeMn production, yet their environmental performances are still unexplored. This study evaluates the possible environmental co-benefits and trade-offs of replacing metallurgical coke with biocarbon, with and without CCS...

In order to accelerate the deployment of capture and storage (CCS), engineers need experimentally validated models, among other things, to predict the mass flow rate in process equipment and flow restrictions like valves, nozzles and orifices. There are few available, relevant data for choked flow...

This paper reports on process synthesis and economics of combined methanol and CHP (combined heat and power) energy production from crude biooil, waste glycerol produced in biodiesel factories and biomass wastes using integrated reactor design for hydrogen rich syngas. This new process consists of three...

...heterogeneous nature of solid biomass fuels makes their combustion a substantial challenge compared to the more traditional fuel types such as fossil fuels and natural gas. Many studies found in the literature attempt at identifying enhancements in fuel properties of biomass after a thermal pretreatment step...

...various failure modes—spontaneous, missing or unwanted operation. The latter two types of failures only occur when an initial failure has happened, and thus are more likely to happen when the probability of failure of transmission lines is high, such as in an extreme weather scenario. This causes an...