The objective of DACOMAT is to develop more damage tolerant and damage predictable low cost composite materials in particular aimed for used in large load carrying constructions like bridges, buildings, wind-turbine blades and offshore structures...
In the project, Solidification of Unseeded high-PERformance MULTIcrystalline Silicon (SUPERMULTI), we aim to secure the future competitiveness of REC Solar's tall multicrystalline ingots by influencing the recombination activity of structural defects...
Photovoltaic (PV) is recognized as one of the main renewable energy solutions for fulfilling the targets defined by the EU Energy Roadmap 2050 and the SET Plan. Most of the current commercial PV devices are formed by single junctions, and more...
The goal of the Ensureal EU project, is to ensure zero waste production of alumina in Europe. This will be done by developing a zero-waste process for alumina production that can handle a wider range of bauxite than the existing process. The process...
Modern vehicles contain up to ten different heat-exchangers, sometimes more. Due to advanced requirements with respect to product's characteristics, aluminum brazed products are clearly dominant in the heat-exchanger industry. An increasing demand...
Forming of massive Aluminium in demanded geometries is performed through forming tools that apply high pressure on the material in certain way. Often, several forming steps are necessary. One reason is that the forming pressure would be too high to...
Norwegian cast iron foundries have identified a clear potential for improving their competitiveness by mastering use of alloyed (Cr) and galvanized (Zn) scrap, improving slag control for higher productivity and better product quality and reaching...
The main goal of KOPROD is to demonstrate methods and technology solutions for future competitive production of complex, small and medium volume products for cost-sensitive markets. The project is financed by the Norwegian Research Council's BIA...
Erosion on wind turbine leading edges reduces turbine performance and is one of the most critical degradation mechanisms (in terms of maintenance cost) occurring on wind turbine farms. The projects aim is to develop better leading-edge coating...
OXIPATH is a strategic effort initiated by SINTEF Industry with the aim to address key technological issues related to oxide materials applied in three fast growing technology areas: piezoelectric devices, batteries and thermoelectric devices.
SUSOLTECH (Research Center for Sustainable Solar Cell Technology) is a Research Centre for Environment-friendly Energy Research. SUSOLTECH joins the leading Norwegian research groups in solar cell technologies with leading companies in the solar cell...
The ReGenWool project focused on chemical recycling of low-grade wool and post-consumer wool waste, and utilizing the recycled materials to generate new materials.
The project "Solar Fuelled Electric Maritime Mobility" by SINTEF seeks to demonstrate the feasibility and the social, economic and environmental benefits of solar-fuelled electric boat transport in Tunisia and the wider region.
The aim of the project is to enhance our understanding of erosion and scale formation in pneumatic conveying systems and to develop a method for online monitoring of these two phenomena.
The micro-sonde well logging system is a concept for obtaining along-well measurements of temperature, changes in fluid velocity and pressure while drilling. The micro-sondes are encapsulated, self-contained measurement devices designed to follow the...
Photovoltaic solar energy is recognized as one of the most promising future sustainable energy sources. Multicrystalline silicon solar cells represent the most cost effective alternative. In this type of solar cells crystal defects and impurities are...
The proposed Centre will contribute to increasing the cost-competitiveness of the PV industry in general, thus enabling the Norwegian PV industry to further improve its strong global position. In order to achieve world-class research and innovation...