The objective of the project is to review former previous DEMO-projects and collects views on cross cutting issues from experienced staff, thereby utilizing valuable insights and help future hydrogen lighthouse- projects consider the pros and cons of...
SINTEF has since 2003 conducted annual national ripple effect analyzes in the fisheries and aquaculture sector on behalf of various clients.
The ThinSi project will develop a solar cell processing chain for high throughput, cost-effective manufacturing of thin film silicon based solar cells on low-cost silicon substrates. The substrates will be made on the basis of an innovative powder-to...
The goal of the HyPilot project was to investigate the need for new research infrastructure (RI) and evaluate concepts for access to and organization of national pilot test infrastructures for hydrogen technologies based on a thorough gap analysis...
The project addresses from one site the most critical and costly step to produce liquid fuel from natural gas using conventional routes, e.g. the stage of syngas production, and from the other side explores alternative routes to convert natural gas...
The OffshoreGrid project is the first in-depth analysis of how to build a cost-efficient grid in the North and Baltic Seas.
The overall objective of the project is to establish basic understanding of deep water pipeline repair welding and hot tapping, as studied in both national and international laboratories using pressure chambers to simulate dry hyperbaric welding...
The main goal of the project is to establish criteria and solutions for safe and cost-effective application of materials for hydrocarbon exploration and production in arctic regions.
The approach of AFORE project is to develop novel, industrially adaptable and techno-economically viable bio-based solutions for the separation, fractionation, and primary upgrading of green chemicals from forest residues, wood chips, and chemical...
The main objective of the CO2 Field Lab project is to assure and increase carbon storage safety by obtaining valuable knowledge about monitoring of CO2 migration in geological formations. This will enable detection of possible CO2 leakage at the...
The Norwegian ferroalloy industry (with a significant international ownership) cooperates in the field of environmental challenges, and is internationally renowned for sustainable production. The innovation is therefore on a national and...
The resistance at the metal contact-semiconductor interface and recombination at the passivating layer-semiconductor interface are two important bottlenecks for improving the performance of current solar cells. These processes are quantum mechanical...
The OCMOL project aims at developing an innovative chemical route adapted to the exploitation of small gas reservoirs from both a technical and an economic point of view. The corresponding process is, among others, based on oxidative coupling of...
The TACO EU Project will develop a new type of laser based time-of-flight 3D camera, that will give robots a more “human view of the world”.
This is a large industrial project between Nobina AB in Sweden and SINTEF Optimisation. The project focuses on building a personnel scheduling engine - SkiftOpt - that matches bus drivers to shifts. The engine creates a work schedule for personnel by...
Interdisciplinary research centre for technical and environmental development of hydro power, wind power, power line rights-of-way and implementation of environment and energy policy.
The discovery of porous hybrid materials constructed from inorganic nodes and organic multifunctional linkers has established a new area of inorganic-organic hybrids (Metal-Organic Frameworks, MOFs) with extraordinary performance as compared to...
EFFIPRO will develop electrolytes and electrodes for proton conducting fuel cells (PCFCs) based on novel LaNbO4-type and similar proton conducting oxides that, unlike earlier candidates, are chemically stable and mechanically robust. The transport of...