SOLVit
SOLVit - is an eight-year research and development program funded by Gasnova and the Norwegian industrial company Aker Clean Carbon - who is also coordinator.
SINTEF Industry projects
MUST – Multi-level protection of materials for vehicles by smart nanocontainers
The project MUST aims at providing new technologies based on active multi-level protective systems for future vehicle materials. “Smart” release nanocontainers will be developed and incorporated in commercial paints, lacquers and adhesive systems to...
PEMWE – Developing next generation low cost and durable PEM water electrolysers
In this project, SINTEF and NTNU will build competence and contribute to the further development of PEM water electrolysis technology with respect to cost and durability
CESAR – enhanced separation and recovery
CESAR aims for a breakthrough in the development of low-cost post-combustion CO2 capture technology to provide economically feasible solutions for both new power plants and retrofit of existing power plants which are responsible for the majority of...
CAESAR – CArbon-free electricity by SEWGS: advanced materials, reactor and process design
The project CAESAR is building on work currently performed with the FP6 IP CACHET. One of the four pre-combustion CO2 capture technologies that are being developed in CACHET is the Sorption Enhanced Water Gas Shift (SEWGS) process. The SEWGS process...
DECARBIT – Enabling advanced pre-combustion capture techniques and plants
DECARBit responds to the urgent need for further research and development in advanced pre-combustion capture techniques to substantially reduce emissions of greenhouse gases from fossil fuel power plants. The project will accelerate the technology...
NORPEM – Development and demonstration of an efficient and cost competitive PEMFC system for cold Nordic climate
In this project, Volvo Technology will in close cooperation with SINTEF provide R&D support for PowerCell for further technology development. This collaboration is based on Volvo Technology’s PEM fuel cell stack development and SINTEF’s experience...
FCTEDI – Fuel Cell TEsting and DIssemination
The FCTEDI project is exclusively concerned with the dissemination of results in fuel cell testing, quality assurance and safety of fuel cells especially efforts on harmonization, benchmarking and validation of a collection of test protocols, testing...
FeVind – thinner cast components for windmills of the future
The FeVIND project shall develop new knowledge built into new simulation tools and sub-routines, which will contribute to a more intelligent design and a reduction of todays oversized cast iron wind turbine components, new/improved materials and a...