SINTEF search

Water photoelectrolysis has the potential to produce renewable hydrogen fuel, therefore addressing the intermittent nature of sunlight. Herein, a monolithic, photovoltaic (PV)-assisted water electrolysis device of minimal engineering and of low (in the μg range) noble-metal-free catalysts loading is...

For assembly of MEMS by use of soldering, the metallization on the MEMS and the soldering process must be selected carefully to ensure long-term reliable joints. A range of combinations of adhesion metal layers and solders were tested in this work. The target was to find a metallization system for...

Ceramic oxygen separation membranes can be utilized to reduce CO₂ emissions in fossil fuel power generation cycles based on oxy-fuel combustion. State-of-the-art oxygen permeable membranes based on Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) offer high oxygen permeability but suffer from long-term instability...

A pH drop during the inflammatory phase during bone regeneration can cause corrosion in TiO₂ bone scaffolds and the loss of compressive strength. Corrosion as ion leaching and dissolution is confined to grain boundaries. Cationic doping of TiO₂ showed to increase the compressive strength but...

The present work reports charging effects and surface potential variations in pure copper, cuprous oxide and cupric oxide nanowires observed by electrostatic force microscopy (EFM) and Kelvin probe force microscopy (KPFM). The copper nanowires were produced by wet synthesis, oxidation into cuprous...

Predicting crystal structure information is a challenging problem in materials science that clearly benefits from artificial intelligence approaches. The leading strategies in machine learning are notoriously data-hungry and although a handful of large crystallographic databases are currently...

Abstract Atomic ordering in single-crystal β –Cu–Zn–Al, relevant to the martensitic transformation and functional properties, is investigated using analytical STEM. Atomic-resolution EDS along the [110] zone axis, where all Wyckoff positions are spatially resolved, reveals three chemically distinct...

Proton ceramic electrochemical cells PCECs hold promise for efficient, sustainable production and use of hydrogen. The positive electrodes are mixed proton conducting perovskites that facilitate water splitting and oxygen reduction, but the factors that determine the protonation are poorly under...

Amorphous TiO₂ nanotubes (TNTs) grown anodically on Ti metal in aqueous electrolytes show a crystallization behaviour strongly dependent on the atmosphere used during annealing at high temperature. In wet oxidizing conditions, the amorphous TNTs walls transform into relatively large and well...

Composite coatings containing reduced graphene oxide (rGO) and 3-(aminopropyl)triethoxysilane functionalised rGO (APTES-rGO) were prepared by sol–gel technology and deposited on Al 2024 T-3. Covalent functionalisation of GO by APTES occurred by formation of amide bonds, accompanied by GO reduction...

In this study, laser-treated polycrystalline Si (pc-Si) wafers, fabricated by wire sawing of hot-pressed ingots sintered from Si powder, have been investigated. As-cut wafers and those with high-quality thin Si layers deposited on top of them by e-beam have been subjected to laser irradiation to...

In this work, a complementary microstructural and optical approach is used to define processing conditions favorable for the formation of deep boron-related acceptor centers that may provide a pathway for achieving an intermediate band behavior in highly B-doped 3C-SiC. The crystallinity, boron...

A new improved oxide dispersion strengthened (ODS) Eurofer steel was produced by a novel two step mechanical alloying route. Starting from atomized Eurofer powder, two batches of fine and coarse particles with average sizes of ~60 μm and ~120 μm were milled separately after the addition of Ti and...

Biofilm-associated infections are a public health concern especially in the context of healthcare-associated infections such as catheter-related bloodstream infections (CRBSIs). We evaluated the biofilm formation and antimicrobials resistance (AMR) of Enterobacter cloacae complex and Candida...

Interfaces formed by Al-Al thermocompression bonding were studied by the transmission electron microscopy. Si wafer pairs having patterned bonding frames were bonded using Al films deposited on Si or SiO2 as intermediate bonding media. A bond force of 36 or 60 kN at bonding temperatures ranging from...

High-entropy alloys are a class of materials intensely studied in the last years due to their innovative properties. Their unconventional compositions and chemical structures hold promise for achieving unprecedented combinations of mechanical properties. The Cu–Fe–Ni–Mo–W multicomponent alloy was...