Norwegian University of Science and Technology (NTNU), Institute for Energy Technology (IFE) and SINTEF Energy Research cooperate to develop Norwegian competence and know-how in wind power technology.
"Increased utilization of the Nordic power transmission system”, was a project that SINTEF Energy Research carried out together with Nordic universities and the Nordic transmission system operators Elkraft System, Fingrid, Svenska kraftnät and...
Surveys on living conditions among people with activity limitations in developing countries
Industrial challenges - Oil wells produce a lot of water (e.g. 30%), while customers specify the water content to be below a certain limit (e.g. 0.5%). One technique for separating water from the crude oil is so-called gravity separators; large tanks...
Information about components and equipment
SINTEF has played a key role in the development of various financing schemes in health care in Norway. From the early development of DRGs, until the more recent changes in the overall block funding and capitation.
When the proposed HVDC links from southern Norway to the Netherlands and Germany start operation, the total exchange capacity to the Continent will increase to about 2800 MW from the four HVDC terminals located within a geographical distance of...
Saline Aquifer CO2 Storage (SACS) - an offshore demonstration at the Sleipner field Reduction of the emission of gases with potential negative climate effects has been defined as one of the major goals of the Kyoto conference. Removal of CO2 from...
The Norwegian GIS User Group deals with issues related to operation and maintenance of the 90+ GIS installed in the Norwegian 145, 300 and 420 kV power transmission grids.
SINTEF offshore blowout database is a comprehensive event database for blowout risk assessment. The database, per December 2022, includes information on 711 offshore blowouts/well releases that have occurred world-wide since 1955 and overall exposure...
The SFH 112 hull is an example hull for a north europeean fisheries vessel. The geometry is defined as to make the hull susceptible for parametric roll.
Water content estimation is critical in split-cod production. We have developed a contact free transflection probe which has shown even better results than the traditional contact probe.