To main content

Stein Hauge

Senior Adviser

Stein Hauge

Senior Adviser

Stein Hauge
Phone: 930 18 395
Department: Software Engineering, Safety and Security
Office: Trondheim

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1298657

Safety instrumented systems often employ redundancy to enhance reliability, but the intended effect may be reduced when common cause failures are taken into account. It is often assumed that a certain fraction of component failures will occur close in time, due to a shared cause. Unfortunately, few ...

Authors Hauge Stein
Year 2016
Type Journal publication
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1339741

This report summarizes the work performed in PDS-BIP activity 2: "Environmental barrier indicators". The purpose of the present report is to propose a set of suitable indicators for a specified drilling scenario and to describe a methodology for developing such indicators. Oppdragsgiver: Multiclient...

Authors Hauge Stein
Year 2012
Type Report/thesis
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1014383

The Deepwater Horizon accident in the Gulf of Mexico, leading to the largest oil spill in the US history and the death of 11 men, has been thoroughly investigated to avoid a similar catastrophe in the future. In this paper we make a review of the accident including a brief overview of the causes, di...

Authors Hauge Stein
Year 2012
Type Journal publication
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1268239

This report summarizes the result from PDS-BIP activity 1. Focus is on non-planned acute releases to sea and the barriers applied during drilling, workover and subsea production in order to prevent such releases. The report discusses requirements to such barriers on two different levels: (1) on a hi...

Authors Hauge Stein
Year 2011
Type Report/thesis
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1273505

PDS is a method used to quantify the safety unavailability and production loss for Safety Instrumented Systems (SIS). The method has recently been updated, resulting in a new PDS method handbook and an accompanying data handbook. In this paper a brief introduction to the updated PDS method is given....

Authors Hauge Stein
Year 2006
Type Conference lecture and academic presentation