In this work, we have used both plain titania nanotubes, TNTs, and their reduced black analogues, bTNTs, that bear metallic conductivity (prepared by solid state reaction of TNTs with CaH2 at 500 °C for 2 h), as catalyst supports for the oxygen evolution reaction (OER). Ir was subsequently been...
Liquid film migration is of great practical importance in materials engineering. The phenomenon has been shown to depend on thermal gradients and coherency strain, but no single driving mechanism seems capable of justifying the whole array of experimental observations. On the other hand, the...
The widespread use of fuel cells and water splitting devices for energy generation and storage is limited by the dependence on noble metal catalysts. There is thus a tremendous need for the development of efficient electrocatalysts based on Earth-abundant elements. Nature inspired hydrogenases (HydA...
Photo-assisted electrochemical systems present a sustainable pathway for water splitting and metal–air batteries, yet their performance is hindered by poor visible- light utilization, short carrier lifetimes, and sluggish redox kinetics. This work introduces a novel concept of a plasmon-enhanced...
Dypingite, a hydrated magnesium carbonate hydroxide mineral [Mg5(CO3)4(OH)2·XH2O, X = 5–6], exhibits promising catalytic and purification properties. Although it was discovered 55 years ago, the crystal structure of this compound has remained unknown due to its aggregated morphology and structural...
Amorphous indium-gallium-zinc-oxide (a-IGZO) based memristive devices with molybdenum contacts as both top and bottom electrodes are presented aiming to be used in neuromorphic applications. Devices down to µm are fabricated using conventional photolithography processes, with an extraor-dinary...
Dypingite is a naturally occurring mineral, with an empirical formula Mg₅(CO₃)₄(OH)₂·5H₂O, and a member of the hydrocarbonate mineral group. It was named in 1970 by Gunnar Raade, after the Dypingdal serpentine-magnesite deposit in Norway ( ). Recently, it was reported that this mineral can...
In this study, a lab-scale wastewater treatment plant (WWTP), simulating biological treatment, received 10 μg/L Ag and 100 μg/L TiO2 nanoparticles (NPs) for 5 weeks. NP partitioning was evaluated by size fractionation (>0.7 μm, 0.1−0.7 μm, 3 kDa-0.1 μm, < 3 kDa) using inductively coupled plasma...
High-Entropy Alloys are advanced technological materials composed of several (typically five) elements in nearly equal atomic concentration. By forming these alloys, previously unknown phase fields of multidimensional phase diagrams are explored. The large number of possible substitutions of...
Considering that the synthesis of tetrahedrite-based materials usually uses high purity elements, the evaluation of the direct application of ore samples as raw materials for their synthesis is a pertinent issue. In the present study, multiphase synthetic tetrahedrite samples were mixed with...
Introduction and objective Martensitic phase transformations in Cu-Zn-Al alloys give rise to functional behaviors such as superelasticity, the shape memory effect, and elastocaloric responses, making them attractive for various applications, including solid-state cooling. While the bulk behavior of...
The Cu-Pd-Sn material system has a (Cu, Pd) 3 Sn phase region that shows an interesting and unexplored marten- sitic phase transformation. Literature on this system is limited and the description of the phases present is incom- plete and partly contradictory. With focus on a specific Cu-rich...
Defects in high performance multi-crystalline silicon wafers can be detrimental to the lifetime of the solar cell. It is, therefore, important to study and understand the underlying structure and chemical elements present at these defective areas in order to suppress them. The underlying cause of...
High-entropy alloys (HEAs) are a class of materials which have been intensely studied during the last years due to their innovative properties. However, their unconventional compositions and chemical structures hold promise for achieving unprecedented combinations of mechanical properties...
Cu2O/ZnO has been envisaged as a potential material system for the next generation thin film solar cells. So far, the experimental efforts to obtain conversion efficiencies close to the theoretically predicted value have failed. Combining aberration-corrected (scanning) transmission electron...
Energy filtering has been suggested by many authors as a means to improve thermoelectric properties. The idea is to filter away low-energy charge carriers in order to increase Seebeck coefficient without compromising electronic conductivity. This concept was investigated in the present paper for a...
The fraction of organic matter present affects the fragmentation behavior of sialoliths; thus, pretherapeutic information on the degree of mineralization is relevant for a correct selection of lithotripsy procedures. This work proposes a methodology for in vivo characterization of salivary calculi...
Titanium dioxide was synthesized on glass substrates from titanium (IV)isopropoxide and hydrochloride acid aqueous solutions through microwave irradiation using as seed layer either fluorine-doped crystalline tin oxide (SnO2:F) or amorphous tin oxide (a-SnOx). Three routes have been followed with...
A CuCrFeTiV high entropy alloy was prepared and irradiated with swift heavy ions in order to check its adequacy for use as a thermal barrier in future nuclear fusion reactors. The alloy was prepared from the elemental powders by ball milling, followed by consolidation by spark plasma sintering at...