Abstract
In this work, different metal oxides (MO) supported on two types of zeolites: 1) natural clinoptilolite (NZ) and 2) synthetic zeolite, ZSM-5 were prepared and tested as catalysts in the fast pyrolysis of hardwood lignin. NZ was modified with the CaO and MgO by a simple two steps procedure consisting of an ion exchange reaction and a subsequent calcination at 773 K. The synthetic ZSM-5 was modified with several MO species (Ni, Cu, Ca, Mg) by a wet impregnation and calcination at 873 K. Тhe prepared catalysts were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDS) and measurement of specific surface area (BET method). Acid sites were characterized and quantified by pyridine (py) absorption using Fourier transform infrared spectroscopy (FTIR). The catalysts exhibit catalytic activity depanding on modification, reaction temperature and of the MO contents. The highest yield of useful phenol in bio-oil was obtained with NiO/ZSM-5 (34.8 wt.%) which exhibits the highest specific surface area and the highest concetration of Brönsted and Lewis acid sites. The studied catalysts did not increase significantly the content of polycyclic aromatic hydrocarbons (PAHs) and heavy compounds compared to non-catalytic experiment. [Projekat Ministarstva nauke Republike Srbije, br. 172018]