To main content

New fast-track software tool for emissions-free transport

New software now being developed as part of an EU-funded project will ease the roll-out of hydrogen-powered haulage vehicles, ships and trains when a “new Europe” starts to take shape once the Covid-19 crisis is behind us.

Hydrogen bus in London traffic
Today, an emissions-free, hydrogen-powered bus is rolling up and down the streets of London. Following an initiative from SINTEF, an EU project has been launched aiming to develop aids to make the transition to hydrogen technology easier and less expensive for the transport sector. Stock photo: Shutterstock

"The Green Transition" has become a mantra for everything from the manufacture of tomorrow’s products to the ways in which we transport people and materials. However, according to SINTEF researcher Kyrre Sundseth, many people tend to forget how demanding it is rapidly to develop emissions-free systems in the transport sector.

As part of the "European Green Deal” – an EU initiative designed to make Europe climate neutral by 2050 – the use of hydrogen-based fuel cells is a key factor. These cells are small, transportable devices that convert hydrogen and air into electricity. The electricity is used to drive an electric engine that in turn powers haulage vehicles, ships and trains. The only emissions are pure water. 

Hydrogen-powered vehicles are also fitted with a small battery that charges up when the vehicle brakes. The battery can then generate power to provide the engine with an extra boost when this is needed.

“More and more of the people in Europe who are currently developing ships, buses, haulage vehicles and trains want to counter the climate change crisis with zero-emissions systems”, says Sundseth. “However, a cost-effective transition demands specialist knowledge of how hybrid fuel cells and battery systems have to be integrated and operated in order to achieve optimal performance. For many companies, a lack of such knowledge acts as a barrier, which in the worst case puts a block on technological development”, he says. 

The way ahead after Covid-19

With this in mind, SINTEF has launched the EU project called "Virtual-FCS", and Sundseth has been appointed its coordinator.

The project involves scientists from five countries who, over the next three years, will be constructing an open software tool for the design and integration of optimal hydrogen-based propulsion systems. The software will serve as an aid that all those working in the industrial and research communities will be welcome to use, and advance.  

The project was launched before the current Covid-19 outbreak reached Europe. However, Sundseth is quick to emphasise that the pandemic has made the work of the project even more important. 

“Once the pandemic is behind us, many jobs will disappear for good”, he says. “The development of new, emissions-free forms of transport will represent a smart way to go on the path towards creating new types of industry and new types of jobs. The climate change crisis won’t simply disappear when the virus is defeated. And if we are to mitigate climate change by reducing emissions, the biggest cuts will have to made in the transport sector. This is one of the reasons why hydrogen technology is key to the green global re-start once we emerge from the other side of the pandemic”, says Sundseth.

Goodbye to over-scaling

The software tool being created by the project will provide the developers of hydrogen-powered vehicles and vessels with an important guide to help them on their way. More to the point, it will help them to identify the right types – and sizes – of hybrid fuel cell and battery system components, as well as optimal system performance parameters.

According to Sundseth, the planned software will offer a two-fold benefit. The design phase will be more straightforward and faster, and those developing and integrating the systems will avoid over-scaling using expensive components. This will reduce the total development costs. 

Game changer 

“We’re convinced that our project will enable the more rapid implementation of hybrid fuel cells and battery systems”, says Sundseth. “We have to accelerate the rate of development if the world is to achieve zero emissions in time. The results may provide new players in Norway and the rest of Europe with a head start in competition with the established companies. Our objective is to make the new tool into a game changer for the sector”, he says.

Sundseth points out that in Norway, a great deal of interest is being shown in zero-emissions technologies, especially by the maritime sector. 

Time is short

“Projects have been launched that will see the appearance of hydrogen-powered ferries and ships in our Norwegian fjords. We’re also seeing the first hydrogen-driven haulage trucks being used by wholesale distributors ASKO.

However, development is progressing at snail’s pace. Time is short for the development of systems that will make the transition to hydrogen technology easier and less expensive”, says Sundseth, who goes on to add: “Together with other technologies such as batteries and biofuels, hydrogen technology will be essential if Norway is to achieve its climate change mitigation targets. 

Targets that have to be met

Sundseth explains that the performance and lifetime of combined fuel cell and battery systems stand and fall on a single factor. The scientists developing and integrating the systems have to identify the right balance between output, range, weight, price and durability.

“This is the target that we shall be assisting the transport sector in meeting”, says Sundseth. He is proud to be leading a project that has set such lofty ambitions. 

“Our ambition is that the software we are developing will become no less than the standard admission ticket for researchers across the world who are looking to learn how to build hybrid fuel cell systems into their vehicles and vessels”, he says.

Published 15 May 2020
Research Manager
+47 901 22 501

Facts

Hybrid systems

  • Fuel cell systems represent a combination of integrated subsystems. It is essential to design control technology precisely in order to optimise its functionality. Normally, these are hybridised using a battery system that must also be controlled, but in a different way from the fuel cells. 
  • The design and control of a hybrid fuel cell/battery system thus presents a challenge to engineers who normally work only with batteries or internal combustion engines. 
  • During the design phase it is particularly challenging to predict the lifetime of such systems in relation to their intended use. In order to meet lifetime requirements, systems are often over-scaled. This results in poorer performance at higher costs.
  • The software tool currently under development as part of the EU project "Virtual-FCS" is intended to assist developers to get to grips with all of these challenges. In order to reduce the need for prototypes, the project will develop so-called “x-in-the-loop" methods. This involves enabling the hardware and control systems to be tested using approaches such as machine learning, which avoid having to assemble an entire system for testing.

Source: SINTEF

 

Project facts and figures

  • The EU project "Virtual-FCS" was launched in January 2020 and will continue until the end of December 2022.
  • The budget for the project is EUR 1.9 million (NOK 21 million at current exchange rates) and is being funded by the EU Commission.
  • SINTEF has taken the initiative and is acting as Project Coordinator. Project participants include FC Lab from France, Ballard Power Systems Europe from Denmark, Westcon from Norway, Solaris from Poland, Banke (also from Denmark) and Vivarail from the UK.
  • The software being developed by the project is the result of a close collaboration between research scientists and industrial operators who, as part of their day-to-day work, integrate hydrogen and battery systems for ships and ferries, haulage trucks and refuse disposal vehicles, buses and trains. 

Source: SINTEF