To main content
You are here:

6th International Conference of Engineering Against Failure (ICEAF)

6th International Conference of Engineering Against Failure (ICEAF)

It is a great pleasure to invite you to attend and deliver a contributed talk in session "Structural Integrity of Materials Processed by Additive Manufacturing Technologies". ICEAF 2021 takes place virtually this time in June 2021.

Location
Virtual conference
Start
23/06/2021 08:00 Add to calendar
End
25/06/2021 16:00

Chairmen: Amin S Azar and Spyros Diplas (SINTEF Industry)

We are pleased to invite you in the occasion of the session entitled “Structural Integrity of materials processed by additive manufacturing technologies” within the 6th International Conference of Engineering Against Failure, that will take place virtually in June 2021. You can find the description of the session together with a list of topics in the attached document.

Do not miss the opportunity to present your work at ICEAF 2021 and please submit your abstract, before 28/04/2021, on: https://iceaf.eu/ 

Deadline for the early bird registration is on May 24th, 2021.

For registration and more about programme and speakers,

visit the conference home page here

 

Contact person

Amin Shahrestani Azar
Research Scientist
968 33 668

Explore research areas

Related content

EUROMAT 2021 - European congress and exhibition on advanced materials and processes

Start: 12/09/2021 08:00
End: 16/09/2022 15:00
Location: Graz, Austria
Address: Stadthalle Graz, Messeplatz 1, 8010 Graz, Austria

It is a great pleasure to invite you to attend and deliver a contributed talk in Symposium D1 "Advanced Microscopy in Materials Research". Symposium D1 is part of the next EUROMAT 2021 conference that will take place in Graz, Austria, September 2021.

INFACON XVI, September 26-29, 2021 (Hybrid conference)

Start: 26/09/2021 17:00
End: 29/09/2021 16:30
Address: Brattørkaia 1, 7010 Trondheim

The 16th International Ferroalloys Congress (INFACON XVI) will be held September 26 - 29, 2021 at the Clarion Hotel & Congress Trondheim.

MAGNIFICENT-Additively manufactured Magnetic High Entropy Alloys for Renewable Electricity

Start: 01/04/2019
End: 31/07/2022

The aim ogf the project is to produce magnetic materials with superior and long-lasting magnetic properties based on high entropy alloys (HEA), using machine learning and additive manufacturing for materials selection and synthesis as well as high throughput materials characterisation at the micro and nano level.

Webinar: New and innovative methods for the conversion of alkanes to olefins and aromatics

Start: 13/04/2021 09:00
End: 13/04/2021 12:15
Location: Digital

Joint Webinar for three H2020 projects developing new and innovative methods for the conversion of alkanes to olefins and aromatics.

AEMON - Novel Failure Monitoring System for Marine Applications by including Acoustic Emission

Start: 2019
End: 2022

Gear systems are critical in maritime vessels and wind turbines, and damage of components in these systems may lead to catastrophic and costly failure. Today, gears and bearings are often monitored by frequent inspections and manual condition monitoring. However, closed gears are not easily inspected, and in autonomous and remote-controlled vessels and subsea installations, remote condition monitoring is the only option over long periods of time.

Impurity control in high performance multicrystalline silicon

Start: 2013
End: 2017

Photovoltaic solar energy is recognized as one of the most promising future sustainable energy sources. Multicrystalline silicon solar cells represent the most cost effective alternative. In this type of solar cells crystal defects and impurities are pres ent; crystal defects are introduced during crystallization, and impurities are introduced from the feedstock, the crucibles or the coating. The impurities and defects interact to reduce the solar cell efficiency. Therefore research which aims to increase solar cell efficiency needs to address two factors: How to minimize the presence of crystal defects and impurities, and how to mitigate their effects.