To main content

Richard Blom

Senior Research Scientist

Richard Blom

Senior Research Scientist

Richard Blom
Phone: 906 22 647
Department: Process Technology
Office: Oslo

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1818954

Adsorption-based post-combustion CO2 capture is enjoying significant research attention due to its potential for significant reductions in energy penalty, cost and environmental impact. Recent sorbent development work has focussed on polyethyleneimine (PEI) and dry sorbents that exhibit attractively...

Authors Dhoke Chaitanya Cloete Schalk Willem Petrus Krishnamurthy Shreenath Seo Hwimin Luz Ignacio Soukri Mustapha Park Yong-ki Blom Richard Amini Shahriar Zaabout Abdelghafour
Year 2020
Type Journal publication
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1807378

Metal-Organic Frameworks (MOFs) thanks to their Type V water adsorption isotherm (“S-Shape”) and large water capacity are considered as potential breakthourgh adsorbents for heat-pump applications. In particular Al(OH)-fumarate could enable efficient regeneration at lower temperature than silica-gel...

Authors Farrusseng David Daniel Cécile Hamill Conor Casaban Jose Didriksen Terje Blom Richard Velte Andreas Fueldner Gerrit Gantenbein Paul Persdorf Patrick Daguenet-Frick Xavier Meunier Francis
Year 2020
Type Journal publication
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1807339

Shaping of metal-organic frameworks into macro-structured particles for reactors and separation processes is a fundamental step in their way towards commercialization. Extrusion techniques which are used for shaping many porous materials resulted in significant reduction of surface area in many MOF ...

Authors Lee Daniel W Didriksen Terje Olsbye Unni Blom Richard Grande Carlos Adolfo
Year 2020
Type Journal publication
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1807327

Well-shaped 300–700 μm spheres of aggregated metal–organic framework CPO-27-Ni crystallites have been produced using a spray-granulation method with cross-bonded alginate as the binder. The spheres are suitable for use in a moving-bed temperature-swing adsorption (MBTSA) process for postcombustion C...

Year 2020
Type Journal publication
Publication
https://www.sintef.no/en/publications/publication/?pubid=CRIStin+1769148

The present work involves the scale-up and characterization of CPO-27–Ni metal organic framework using a range of experimental techniques aimed at determining equilibrium and kinetic parameters to assess its potential for post-combustion carbon capture. CPO-27–Ni was prepared from its precursors by ...

Authors Krishnamurthy Shreenath Blom Richard Ferrari Maria-Chiara Brandani Stefano
Year 2019
Type Journal publication