To main content

Sylvain Gouttebroze

Senior Research Scientist

Sylvain Gouttebroze

Senior Research Scientist

Sylvain Gouttebroze
Phone: 982 83 955
Email:
Department: Metal Production and Processing
Office: Oslo

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/?pubid=1597044

A combined grain boundary segregation and precipitation model is presented. The model predicts the formation of precipitate free zone (PFZ) at the grain boundaries in aluminium alloys, accounting for the quench rate after solution heat treatment and the following heat treatment during which hardenin...

Authors Jesper Friis Sylvain Gouttebroze Dongdong Zhao Yanjun Li
Year 2018
Type Academic lecture
Publication
https://www.sintef.no/en/publications/publication/?pubid=1149108

Surface adhesion between wet wafers poses great challenges for silicon wafer handling. It has been shown that both the shear and normal handling forces of the solar silicon wafers can be dramatically reduced by using the ultrasound energy. Approximately 20 and 5 times reduction in horizontal and ver...

Authors Saber Saffar A Abdullah Sylvain Gouttebroze Zhiliang Zhang
Year 2014
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/?pubid=1048170

Vibration is one of the most common loading modes during handling and transport of solar silicon wafers and has a great influence on the breakage rate. In order to control the breakage rate during handling and facilitate the optimization of the processing steps, it is important to understand the fac...

Authors Saber Saffar Sylvain Gouttebroze Zhiliang Zhang
Year 2014
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/?pubid=1196064

Solar silicon wafers are mainly produced through multiwire sawing. The sawing process induces micro cracks on the wafer surface, which are responsible for brittle fracture. Hence, it is important to scrutinize the crack geometries most commonly generated in silicon wafer sawing or handling process a...

Authors Saber Saffar Sylvain Gouttebroze Zhiliang Zhang
Year 2014
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/?pubid=1196071

Small-scale solidification simulations were carried out in order to study the effect of the grain orientation and cooling rate on the stresses in mono- and bi-crystals. First, a 2D-axisymetric heat-transfer model of the global furnace is established to provide input to the sub-model. The sub-model t...

Authors Sylvain Gouttebroze Antoine Autruffe Lars Martin Sandvik Aas Morten Kildemo Xiang Ma
Year 2014
Type Academic article