To main content

Rune Harald Gaarder

Research Scientist

Rune Harald Gaarder

Research Scientist

Rune Harald Gaarder
Phone: 982 83 931
Email:
Department: Materials and Nanotechnology
Office: Oslo

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/1713646/

Dry peel plies are generally used in composite manufacturing by liquid moulding techniques in the maritime sector. They allow excess resin to bleed through its weaved structure, keeping the surfaces clean, and in certain cases with the required roughness until ready for bonding. However, these plies...

Publication
https://www.sintef.no/en/publications/publication/1514783/

This paper presents a study of traditional netting materials subjected to disinfecting chemicals during fish farming and treatment of net cages. A series of tests were performed in order to study the effect of various concentrations of disinfecting chemicals on the tensile strength of Raschel...

Year 2017
Type Academic chapter/article/Conference paper
Publication
https://www.sintef.no/en/publications/publication/1509305/

A new rapid prototyping method is reported. It is based on injection molding with inexpensive mold inserts, 3D-printed in durable polymer-based materials. The method allows for manufacturing of microfluidics in common thermoplastics materials at a lower cost and with shorter lead-times compared to...

Publication
https://www.sintef.no/en/publications/publication/1342432/

An experimental study of the role of sub-zero temperature impact damage and subsequent freeze-thaw exposure on post impact compression strength of quasi-isotropic glass fibre reinforced vinyl ester resin composite materials using non-crimp reinforcements typically applied in the marine industry...

Year 2015
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/1259840/

The effect of ageing in a sweet oil environment on the tensile properties, apparent crosslink density, CO2 diffusion and Shore hardness of a typical carbon black reinforced hydrogenated nitrile butadiene rubber (HNBR) is presented. Different ageing conditions yielded materials with different...

Year 2015
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/914591/

Distributions of shear strains and strain states (triaxiality) were analysed for two in-plane shear test fixtures (Iosipescu and V-notched rail), using digital image correlation and numerical simulations. Three different polypropylene-based materials (two talc-filled compounds and one unfilled...

Authors Hamid Daiyan Erik Andreassen Frode Grytten Harald Osnes Rune Harald Gaarder
Year 2012
Type Academic article