Publications and responsibilities
Temperature calibration of type C Temperature calibration of type C
Melting and softening properties of selected quartz sources melted by sessile drop
Melting and softening properties of quartz measured in High Temp Quartz project in 2019 by sessile drop method are summarised in this work. It takes time to obtain complete melting of quartz, up to several hours is required at lower temperature. But it should be at least around 1740°C. Softening...
Effect of melting properties of quartz on industrial Si and FeSi production
The effect of melting properties of quartz is discussed based on estimated temperature distribution in industrial furnaces combined with measured melting properties for various quartz sources. Softening and melting properties for four industrial quartz sources have been investigated in a...
Evaluation of CFF and BPF in pilot scale filtration tests.
Evaluation of CFF and BPF in Pilot Scale Filtration Tests
Melting properties of quartz and its effect on industrial Si and FeSi production
Laboratory scale study of reverse priming in aluminium filtration
Slag-metal interactions in the FeMn tapping process: Interfacial properties and wetting
FeMn-alloys are produced by transforming ore and carbon materials into FeMn and slag at high temperatures in a furnace. Entrainment of FeMn in slag during tapping reduces the yield. Entrainment and subsequent separation are strongly influenced by slag-metal interfacial properties. In the current...