To main content

Evaluation of the tensile properties of X65 pipeline steel in compressed gaseous hydrogen using hollow specimens

Abstract

Hydrogen has great potential on the path towards decarbonization of the energy and transport sectors and can mitigate the urgent issue of global warming. It can be sustainably produced through water electrolysis with potentially zero emissions, and efficiently used (e.g., in fuel cell systems). Despite its environmental advantages, hydrogen-metal interactions could result in the degradation of the mechanical properties of several structural materials. In order to determine the magnitude of the material degradation in relation to hydrogen exposure, extensive material testing is required. The standardized procedure for in-situ testing for the quantification of the impact of compressed gaseous hydrogen (CGH2) relies on the utilization of an autoclave around the tested specimen. Such test set-up is complex, expensive, time-consuming and requires special equipment, trained personnel, and strict safety procedures. A relatively recent method to circumvent these issues and provide affordable results consists of using hollow specimens, thus applying the hydrogen pressure inside rather than outside the specimen. It allows to reduce the volume of hydrogen by several orders of magnitude and to perform the tests more efficiently and in a safer manner. This study focuses on evaluating the tensile properties of X65 vintage pipeline steel tested in a high-pressure hydrogen environment using hollow specimens. Tests are performed in 6 MPa H2 and Ar at the nominal strain rate of 10−6 s−1 to evaluate the reduced area at fracture and the elongation loss. The effect of surface finishing on crack initiation and propagation is investigated by comparing two different manufacturing techniques. In this way, this study provides insights into the applicability of a novel, reliable, and safe testing method which can be used to assess the hydrogen-assisted ductility loss in metallic materials.
Read the publication

Category

Academic article

Language

English

Author(s)

  • Florian Konert
  • Alessandro Campari
  • Jonathan Nietzke
  • Sobol Oded
  • Nicola Paltrinieri
  • Antonio Alvaro

Affiliation

  • SINTEF Industry / Materials and Nanotechnology
  • Federal Institute for Materials Research and Testing
  • Norwegian University of Science and Technology

Year

2024

Published in

Procedia Structural Integrity

Volume

54

Page(s)

204 - 211

View this publication at Norwegian Research Information Repository