To main content

Influence of fast rise voltage and pressure on partial discharges in liquid embedded power electronics

Abstract

Initiation of partial discharges at the highly stressed regions of an Insulated Gate Bipolar Transistor (IGBT) can lead to degradation of the insulation and eventual total breakdown of the system. In this work, an experimental setup has been designed for the study of partial discharges (PDs) under different voltage waveforms. PD behavior of IGBT insulation was investigated using conventional and optical techniques. Influence of pressure and voltage wave shape is documented. The test environment was first characterized with point-plane geometry under sinusoidal and slow rise square voltage of up to 20 kV peak and fast rise square voltage of up to +50 kV. The measured electrical and optical PDs showed good correlation, revealing that optical PDs can be relied on for the characterization of PD phenomena. High slew rate of the square voltage reduced the inception voltage and increased magnitude. The PD pattern from the trench shows the existence of space charges. The PDs which occurred within the triple point region are most likely attracted along the board interface and become surface discharges. Pressure suppresses the initiation and propagation of the discharge.
Read the publication

Category

Academic article

Language

English

Author(s)

Affiliation

  • SINTEF Energy Research / Elkraftteknologi
  • Norwegian University of Science and Technology

Year

2015

Published in

IEEE transactions on dielectrics and electrical insulation

ISSN

1070-9878

Volume

22

Issue

5

Page(s)

2770 - 2779

View this publication at Norwegian Research Information Repository