Abstract
In contrast to isobaric combustors, constant-volume combustion systems, such as internal combustion engines, exhibit a strong coupling between pressure rise and flame dynamics. During isochoric combustion, heat release from the flame leads to expansion of the burnt gases, increasing the pressure in the vessel and raising the temperatures of both unburnt and burnt gases. This study employs direct numerical simulation (DNS) to investigate turbulent flame–wall interaction (FWI) in three premixed fuel–oxidizer systems under these evolving thermodynamic conditions. All cases are designed to have comparable nominal laminar burning velocities and free-flame propagation times before the turbulent FWI takes place, enabling systematic comparison: (i) a fuel-lean H2-air mixture prone to thermo-diffusive (TD) instabilities, (ii) a stoichiometric CH4-air mixture, and (iii) a stoichiometric mixture of air with partially decomposed ammonia (NH3/H2/N2). Comparative analysis of the turbulent FWI and quenching processes reveals distinct fuel-dependent mechanisms affecting the wall heat flux (WHF). For the sub-unity Lewis number H2-air flame, TD transport processes significantly amplify the WHF relative to the laminar reference case. The WHF for the stoichiometric CH4-air flame is only marginally affected by turbulent motions and by the increase in system pressure. In contrast, the TD-stable NH3/H2/N2-air flame unexpectedly exhibits enhanced WHF due to the formation of a near-wall hydrogen concentration boundary layer induced by thermal diffusion (Soret effect). These findings highlight the critical role of transport phenomena in determining wall heat transfer at isochoric combustion conditions and underscore their importance for the accurate modeling and design of hydrogen- and ammonia-fueled combustion systems.