To main content

Daniel Blucher

.

Daniel Blucher

.

Daniel Blucher
Phone: 930 06 103
Email:
Department: Materials and Nanotechnology
Office: Trondheim

Publications and responsibilities

Publication
https://www.sintef.no/en/publications/publication/?pubid=1322725

The atmospheric corrosion of several Mg–Al alloys was investigated at − 4, 4 and 22 °C. The rate of corrosion increased with increasing temperature and decreasing Al content. Also, the effect of temperature became stronger with increasing Al content. The cast microstructure was found to influence...

Authors M. Esmaily Daniel Blucher J.-E. Svensson Mats Halvarsson L.G. Johansson
Year 2016
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/?pubid=1401731

This paper reports the recent findings on corrosion resistance of a new centrifugally cast austenitic corrosion resistant alloy (CRA), 46Ni-35Cr-9Mo, against severe sour gas environment. The sour service corrosion validation was carried out by sulphide stress cracking (SSC) using autoclaves with...

Authors Torstein Lange Daniel Blucher Shankar Venkataraman Dietinde Jakobi Henrik Asteman Roy Johnsen
Year 2016
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/?pubid=1250498

In this study, ultra-fine grained (UFG) structure was produced in the stir zone (SZ) of AA6005-T6 alloy joints using friction stir processing (FSP) cooled by liquid nitrogen (N2). Conventional friction stir welding (FSW) was used to fabricate reference joints. The corrosion properties of the cooled...

Authors Mohsen Esmaily Daniel Blucher Jan-Erik Svensson Mats Halvarsson Lars-Gunnar Johansson Mehrdad Shahabi-Navid
Year 2015
Type Academic article
Publication
https://www.sintef.no/en/publications/publication/?pubid=1249114

The atmospheric corrosion behavior of alloy AZ91D produced by a semi-solid metal (SSM) technique and by conventional high pressure die casting (HPDC) was investigated for up to 1176 hours in the laboratory. Alloy AZ91D in the SSM state was fabricated using a rheocasting (RC) technique in which the...

Authors Mohsen Esmaily Nooshin Mortazavi Seyedeh Jan-Erik Svensson Mats Halvarsson Daniel Blucher Anders E.W. Jarfors Magnus Wessén L.G. Johansson
Year 2015
Type Academic article