List of conferences presentations and papers

 Posters

• A new FP7 project for development and assessment of new and emerging postcombustion
  CO₂ capture technologies
  
  
• Are moving bed temperature swing adsorption (MBTSA) processes feasible for postcombustion CO₂ capture in a NGCC context?

Publications

• Kvamsdal, H. M., Kim, I., Van Os, P., Pevidac, C., Hägg, M., Brown, J., Robinson, L., Feron, P. (2014) HiPerCap: a new FP7 project for development and assessment of novel and emerging post-combustion CO₂ capture technologies, Elsevier ScienceDirect, GHGT-12
  
  
• Hernandez-Mireles, I., van der Stel, R., Goetheer, E. (2014) New methodologies for integrating algae with CO₂ capture, Elsevier ScienceDirect, GHGT-12
  
  
• Nathalie J.M.C. Penders-van Elk, S. Martijn Oversteegen, and Geert F. Versteeg (2016): Combined effect of temperature and pKa on the kinetics of absorption of carbon dioxide in aqueous alkanolamine and carbonate solutions with Carbonic Anhydrase Industrial & Engineering Chemistry Research (IECR)
  
  
• Hartono, A., Vevelstad, S.J., Ciftja, A., and Knuutila, H. (2016): Screening of strong bicarbonate forming solvents for CO₂ capture. International Journal of Greenhouse Gas Control (IJGHGC)
  
  
• Marta G. Plaza, Inés Durán, Nausika Querejeta, Fernando Rubiera, and Covadonga Pevida (2016): Experimental and simulation study of adsorption in post-combustion conditions using a microporous biochar (I): CO₂ and N₂ adsorption. Industrial & Engineering Chemistry Research (IECR)
  
  
• N. Querejeta , M. G. Plaza , F. Rubiera and C. Pevida (2016): Water vapor adsorption on biomass based carbons under post-combustion CO₂ capture conditions: effect of post-treatment. Materials 2016, 9, 359 (doi: 10.3390/ma9050359)
  
  
• Sikander Rafiq, Liyuan Deng, and May-Britt Hägg (2016): Role of Facilitated transport Membranes and composite membranes for efficient CO₂ capture- A review.ChemBioEng, 2016, 3 (2), 68-85
  
  
• Zhongde Dai, Luca Ansaloni, and Liyuan Deng (2016): Recent advances in multi-layer composite polymeric membranes for CO₂ separation: A review. Green Energy & Environment, 2016, 1 (2), 102-128
  
  
• Pfister, M., Belaissaoui, B. and Favre E. (2016): Membrane gas separation processes from wet post combustion flue gases from carbon capture and use (CCU): a critical reassessment. Ind. Eng. Chem. Res. 2017, 56(2), 591-602
  
  
• Bazhenov, S.D., Borisov, I.L., Bakhtin, D.S., Rybakova, A.N., Khotimskiy, V.S., Molchanov, S.P. and Volkov, V.V. (2016): High-permeance crosslinked PTMSP thin-film composite membranes as supports for CO₂ selective layer formation. Green Energy & Environment
  
  
• Plaza, M. G., I. Durán, N. Querejeta, F. Rubiera and C. Pevida (2016): Experimental and simulation study of absorption in post-combustion conditions using a microporous biochar (I): CO₂ and N2 adsorption. Industrial & Engineering Chemistry Research, p. 3087-3112
  
  
• Deng, L., Kvamsdal, H. (2016): CO₂ capture: Challenges and opportunities. Green Energy and Environment. p. 179
  
  
• Hartono, A., R. Rennemo, M. Awais, S. J. Vevelstad, O. G. Brakstad, I. Kim and H. K. Knuutila (2017): Characterization of 2-piperidineethanol and 1-(2-Hydroxyethyl) piperidine as strong bicarbonate forming solvents for CO₂ capture. Int. J. of Greenhouse Gas Control
  
  
• Mondino, G., C. A. Grande and R. Blom (2017): Effect of gas
  recycling on the performance of a moving bed temperature-swing (MTBSA) process for CO₂ capture in coal fired power plant context. Energies. p. 745
  
  
• Plaza, M. G., F. Rubiera and C. Pevida (2017): Evaluating the
  feasibility of a TSA process based on steam stripping in combination with
  structured carbon adsorbents to capture CO₂ from a coal power plant. Energy & Fuels, p. 9760-9775
  
  

• Tobiesen, F. A., Haugen, G., Kim, I. and Kvamsdal, H. (2017): Simulation and energy evaluation of two novel solvents developed in the EU project HiPerCap. Energy Procedia, p 1621-1629
  
  

• Kvamsdal, H.M., G. Haugen, J. Brown, P. Wolbers, R. J. Drew, P. Khakharia, J. G. M. S., Monteiro, E. L. V. Goetheer, J. Middelkamp (2017): Reference case and test case for benchmarking of HiPerCap technologies. Energy Procedia, p. 2642-2657
  
  

• Hartono, A., I. Kim, H. K. Knuutila, L. V. van der Ham and E. Goetheer (2017): Calorimetric studies of precipitating solvent system. Energy Procedia, 744-755 
  
  

• Guerrero, G., D. Venturi, T. Peters, N. Rival, C. Denonville, C. Simon, P. P. Henriksen and M.-B. Hägg (2017): Influence of functionalized nanoparticles on the CO₂/N₂ separation properties of PVA-based gas separation membranes, Energy Procedia, p. 627-635
  
  
• Grande, C. A., H. Kvamsdal, G. Mondino and R. Blom (2017): Development of moving bed temperature swing adsorption (MBTSA) process for post-combustion CO₂ capture: Initial benchmarking in a NGCC context and design of pilot. Energy Procedia, 2203-2210
  
  
• Querejeta, N., M. G. Plaza, F. Rubiera, C. Pevida, T. Avery and S. R. Tennisson (2017): Carbon monolith in adsorption-based post-combustion CO₂ capture. Energy Procedia  
  
  
• Álvarez-Gutiérrez, N., F. Rubiera, C. Pevida, Y. Jin, J. Bae and S. Su (2017): Adsorption performance indicator to screen carbon adsorbents for post-combustion CO₂ capture. Energy Procedia
  
  
• Hartono, A., S. J. Vevelstad, I. Kim, R. Rennemo and H. K. Knuutila (2017): Promoted strong bicarbonate forming solvents for CO₂ capture. Energy Procedia
  
  
• Könst, P., I. H. Mireles, R. van der Stel, P. van Os and E. Goetheer (2017): Integrated system for capturing CO₂ as feedstock for algae production. Energy Procedia
  
  
• Plaza, M. G., I. Durán, F. Rubiera and C. Pevida (2017): Adsorption-based
  process modelling for post-combustion CO₂ capture. Energy Procedia
  
  
• Dai, Z., L. Ansaloni, J. J. Ryan, R. J. Spontak and L. Deng (2017/2018): Nafion/IL Hybrid Membranes with Tuned Nanostructure for Enhanced CO₂ Separation: Effects of Ionic Liquid and Water Vapor. Green Chemistry, p. 1391-1404

Proceedings

• High Performance Capture. Deliverable N° D7.2. 
  Proceedings of the first technical workshop