Sammendrag
This paper presents a gray-box hierarchical instability source identification method of multiple-inverter-fed power systems, which enables stability analysis at system, component, and parameter levels sequentially. Impedance frequency responses of all components are first obtained using frequency scanning method. System impedance network model is then established by connecting these individual components based on system topology, which is further lumped into a loop impedance model (LIM). The vector fitting (VF) algorithm is then used to generate system state-space model from the impedance frequency responses of the LIM for eigenvalues-based stability analysis. If the system is assessed to be unstable, problematic components are further identified by performing impedance-based stability criterion at terminals of all components, where the numbers of right-half-plane poles are obtained by the VF algorithm. Finally, circuit and controller parameters of the identified problematic components are further identified using the VF algorithm, which are re-tuned to improve system stability. The proposed hierarchical instability source identification method is implemented in a multiple-paralleled grid-connected inverter system. Simulation results obtained in Matlab/Simulink platform and real-time simulation verification results obtained in OPAL-RT platform are given to validate the correctness of the theoretical analysis results.