Til hovedinnhold
Norsk English

Structural modifications and electron beam damage in aluminium alloy precipitate θ'-Al2Cu

Sammendrag

The –AlCu phase in an Al–4Zn–2Cu–1Mg–0.7Si (wt.%) alloy was investigated by means of scanning transmission electron microscopy. With our specific alloy composition, the phase is often formed with stacking faults on and planes. The stacking faults on planes are often regularly spaced and create a previously unreported superstructure. Structural damage by electron irradiation is observed, even at a low acceleration voltage of 80 kV. The damage is more pronounced in the precipitates with stacking faults, which agrees with theoretical calculations of knock-on scattering cross-sections. These two very different forms of disruptions of the structure are linked to its spacious interstitial sites and the ease at which Cu atoms diffuse into and between them.
Les publikasjonen

Kategori

Vitenskapelig artikkel

Oppdragsgiver

  • Research Council of Norway (RCN) / 221714
  • Research Council of Norway (RCN) / 197405
  • Sigma2 / NN9158K
  • Sigma2 / NN6068K

Språk

Engelsk

Forfatter(e)

Institusjon(er)

  • Norges teknisk-naturvitenskapelige universitet
  • SINTEF Industri / Materialer og nanoteknologi

År

2015

Publisert i

Philosophical Magazine

ISSN

1478-6435

Årgang

95

Hefte nr.

31

Side(r)

3524 - 3534

Vis denne publikasjonen hos Cristin